Subsoiling shanks

To scroll
01.21

Cultivators shanks, sweeps for cultivators and accessories
(1309)

Spring tines, shares and accessories
(142)

Big harrow tines,, shares and clamps
(160)

Weeding and hoeing technology
(430)

Subsoiling shanks and accessories
(184)

Harrow tines, sweeps and accessories
(168)

Brake tines, shares and clamps
(85)

Quick change BOURGAULT system
(161)

Cultivator tines
(13)

Gare tines, sweeps and clamps
(34)

Slurry technology
(37)

Clamps for harrow spring-tines
(211)

Clamps for double coil springs
(8)

Harrow teeth
(65)

Subsoilers
(12)

Quick change NICHOLS system
(35)

Straw tines
(8)

Stone collector
(3)

Bolts
(38)

Subsoiling shanks
(27)

Shares for subsoiling shanks
(37)

Subsoiling shanks to fit
(38)

Shares for subsoiling to fit as
(64)

Clamps to fit
(2)

Accessories for subsoiling shanks
(64)
Bison shank
Part-no. | 101.06027 |
Weight | 21.000 kg |
Boring | 16,1 - 16,5 - 25 |
Length | 850 |
Hole spacing | 100 - 211 |
Width | 225 |
Thickness | 15 |
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Bison shank
Part-no. | 101.06028 |
Weight | 21.000 kg |
Boring | 16,1 - 16,5 - 25 |
Length | 850 |
Hole spacing | 100 - 211 |
Width | 225 |
Thickness | 15 |
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Subsoiling shank
Part-no. | 101.06775 |
Weight | 32.200 kg |
Boring | 11,5 - 31 |
Length | 660 |
Hole spacing | 170 |
Width | 540 |
Thickness | 25 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Subsoiling shank - compl.
Part-no. | 101.14000 |
Weight | 34.800 kg |
Frame | 100x100 |
Underbeam clearance without share | 660 |
This set contains
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Subsoiling shank - left model
Part-no. | 101.5001L |
Weight | 23.400 kg |
Boring | 16 - 30 |
Length | 828 |
Hole spacing | 80 - 214 |
Width | 175 |
Thickness | 15 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Subsoiling shank - right model
Part-no. | 101.5001R |
Weight | 23.400 kg |
Boring | 16 - 30 |
Length | 828 |
Hole spacing | 80 - 214 |
Width | 175 |
Thickness | 15 |
Accessories
- 101.5003Point
- 101.5004RCounter-tine, right model
- 101.5005RShort stub end wear-cutting edge, right model
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Subsoiling shank, left model
Part-no. | 101.5011L |
Weight | 8.520 kg |
Boring | 14 - 14,5 - 24 |
Length | 608 |
Hole spacing | 85 - 300 - 130 |
Width | 130 |
Thickness | 12 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Subsoiling shank, right model
Part-no. | 101.5011R |
Weight | 8.520 kg |
Boring | 14 - 14,5 - 24 |
Length | 608 |
Hole spacing | 85 - 300 - 130 |
Width | 130 |
Thickness | 12 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Subsoiling shank
Part-no. | 101.5019 |
Weight | 8.560 kg |
Boring | 14 - 24 |
Length | 640 |
Hole spacing | 85 - 302 -126 |
Width | 160 |
Thickness | 12 |
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Subsoiling shank
Part-no. | 101.5020 |
Weight | 24.000 kg |
Boring | 12 - 16 - 30 |
Length | 912 |
Hole spacing | 80 - 200 - 390 - 215 |
Thickness | 15 |
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Subsoiling shank - right model
Part-no. | 101.5021 |
Weight | 20.800 kg |
Boring | 17 - 25 - 32 |
Length | 880 |
Hole spacing | 100 - 90 - 214 |
Thickness | 15 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Subsoiling shank - left model
Part-no. | 101.5022 |
Weight | 20.800 kg |
Boring | 17 - 25 - 32 |
Length | 880 |
Hole spacing | 100 - 90 - 214 |
Thickness | 15 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Subsoiling shank - right model
Part-no. | 101.5034 |
Weight | 24.300 kg |
Boring | 16 - 30 |
Length | 828 |
Hole spacing | 90 - 214 |
Thickness | 15 |
Please see: | Assembling instruction |
Accessories
- 101.2006Share bracket
- 101.5005RShort stub end wear-cutting edge, right model
- 101.5008Bush Ø29,8x15xØ16
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Subsoiling shank - left model
Part-no. | 101.5035 |
Weight | 24.300 kg |
Boring | 16 - 30 |
Length | 828 |
Hole spacing | 90 - 214 |
Thickness | 15 |
Please see: | Assembling instruction |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Subsoiling shank - right model
Part-no. | 101.5053 |
Weight | 24.700 kg |
Boring | 16 - 30 |
Length | 865 |
Hole spacing | 80 - 214 |
Thickness | 15 |
Please see: | Assembling instruction |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Subsoiling shank - left model
Part-no. | 101.5054 |
Weight | 24.700 kg |
Boring | 16 - 30 |
Length | 865 |
Hole spacing | 80 - 214 |
Thickness | 15 |
Please see: | Assembling instruction |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Subsoiling shank LD
Part-no. | 101.5062 |
Weight | 9.600 kg |
Boring | 11,5 - 15 - 17 - 11x145 |
Length | 630 |
Hole spacing | 50 - 25 |
Type | LD |
Thickness | 12 - 25 |
Accessories
- 101.EXT-1042Hi Lift wing - Hard metal
- 101.EXT-1042-SHi Lift wing - Hard metal
- 101.EXT-1053EP Share - Hard metal
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Subsoiling shank SL/ST
Part-no. | 101.5063 |
Weight | 10.300 kg |
Boring | 13 - 17 - 17x148 |
Length | 650 |
Hole spacing | 57 - 25 |
Type | SL/ST |
Thickness | 25 |
Accessories
- 1280810Plough bolt DIN608 M12x1,75x80 and hexagon nut
- 200-PWV-0428Sweep for quick change - 100mm
- 200-QCA-5010Adapter compl. - 200 Series
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Subsoiling shank
Part-no. | 101.5065 |
Weight | 18.640 kg |
Boring | 20,5 - 31 - 33x215 - 33x97 |
Length | 920 |
Hole spacing | 37 |
Thickness | 20 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Subsoiling shank LD
Part-no. | 101.5076 |
Weight | 8.560 kg |
Boring | 11,5 - 15 - 17 - 17x145 |
Length | 485 |
Hole spacing | 50 - 25 |
Type | LD |
Thickness | 12 - 25 |
Accessories
- 101.EXT-1042Hi Lift wing - Hard metal
- 101.EXT-1042-SHi Lift wing - Hard metal
- 101.EXT-1053EP Share - Hard metal
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Subsoiling shank SL/ST
Part-no. | 101.5079 |
Weight | 7.500 kg |
Boring | 13 - 17 - 17x148 |
Length | 500 |
Hole spacing | 57 - 25 |
Type | SL/ST |
Thickness | 25 |
Accessories
- 1280810Plough bolt DIN608 M12x1,75x80 and hexagon nut
- 200-PWV-0428Sweep for quick change - 100mm
- 200-QCA-5010Adapter compl. - 200 Series
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Subsoiling shank - right model
Part-no. | 101.5100 |
Weight | 22.850 kg |
Boring | 16 - 30 |
Length | 820 |
Hole spacing | 80 - 200 - 210 |
Thickness | 15 |
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Subsoiling shank - left model
Part-no. | 101.5101 |
Weight | 22.850 kg |
Boring | 16 - 30 |
Length | 820 |
Hole spacing | 80 - 200 - 210 |
Thickness | 15 |
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Chisel shank - compl.
Part-no. | 101.CHEESEL |
Weight | 40.000 kg |
Length | 750 |
Please see: | Assembling instruction |
This set contains
- 1 x 101.CHEESEL-1Holder compl. with stud bolt and bolt
- 1 x 101.CHEESEL-2Lower part
- 1 x 101.K34Share
- 1 x 1250812Plough bolt DIN608 M12x1,75x50 and hexagon nut
- 1 x 1260812Plough bolt DIN608 M12x1,75x60 and hexagon nut
- 1 x 1270812Plough bolt DIN608 M12x1,75x70 and hexagon nut
- 1 x 76-300Dowel pin Ø16x90
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Subsoiling shank - left model
Part-no. | 101.IND-2588L |
Weight | 8.600 kg |
Boring | 14,5 - 24,5 - 30,5 |
Hole spacing | 105 - 130 |
Thickness | 12 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Subsoiling shank - right model
Part-no. | 101.IND-2588R |
Weight | 8.600 kg |
Boring | 14,5 - 24,5 - 30,5 |
Hole spacing | 105 - 130 |
Thickness | 12 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Subsoiling shank
Part-no. | 101.MAS-2334 |
Weight | 29.600 kg |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Unauthorized use of any of the drawings is a violation of copyright and will be prosecuted. The registrated trademark has been placed in our illustrations solely to protect them as part of our intellectual property.