Gare tines

To scroll
01.21

Cultivators shanks, sweeps for cultivators and accessories
(1309)

Spring tines, shares and accessories
(142)

Big harrow tines,, shares and clamps
(160)

Weeding and hoeing technology
(430)

Subsoiling shanks and accessories
(184)

Harrow tines, sweeps and accessories
(168)

Brake tines, shares and clamps
(85)

Quick change BOURGAULT system
(161)

Cultivator tines
(13)

Gare tines, sweeps and clamps
(34)

Slurry technology
(37)

Clamps for harrow spring-tines
(211)

Clamps for double coil springs
(8)

Harrow teeth
(65)

Subsoilers
(12)

Quick change NICHOLS system
(35)

Straw tines
(8)

Stone collector
(3)

Bolts
(38)

Gare tines
(14)

Gare tines to fit as
(12)

Sweeps for gare tines
(8)

Clamps for gare tines
(6)

Accessories for gare tines
(6)
Gare tine with share
Part-no. | 2.0924 |
Weight | 1.040 kg |
Material dimensions | 25x8 |
Assembly clearance | 40 |
Underbeam clearance without share | 230 |
Total height incl. share | 370 |
Underbeam clearance with share | 270 |
This set contains
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Front gare tine
Part-no. | 2.1017LL |
Weight | 1.120 kg |
Material dimensions | 25x8 |
Assembly clearance | 35 |
Underbeam clearance without share | 270 |
Total height without share | 370 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Elastic gare tine
Part-no. | 2.1017RLL |
Weight | 1.000 kg |
Material dimensions | 25x8 |
Assembly clearance | 35 |
Underbeam clearance without share | 245 |
Total height without share | 343 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Back gare tine
Part-no. | 2.1018 |
Weight | 1.250 kg |
Material dimensions | 26x10 |
Assembly clearance | 38 |
Underbeam clearance without share | 265 |
Total height without share | 365 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Gare tine ZJ65 with share
Part-no. | 2.1019 |
Weight | 1.150 kg |
Material dimensions | 25x10 |
Assembly clearance | 35 |
Underbeam clearance without share | 215 |
Total height incl. share | 355 |
Underbeam clearance with share | 255 |
This set contains
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Gare tine with share
Part-no. | 2.1019LL |
Weight | 1.230 kg |
Material dimensions | 25x8 |
Assembly clearance | 35 |
Underbeam clearance without share | 210 |
Total height incl. share | 360 |
Underbeam clearance with share | 260 |
This set contains
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Elastic gare tine with share
Part-no. | 2.1019R |
Weight | 1.100 kg |
Material dimensions | 25x8 |
Assembly clearance | 35 |
Underbeam clearance without share | 200 |
Total height incl. share | 340 |
Underbeam clearance with share | 245 |
This set contains
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Front gare tine
Part-no. | 2.1020LL |
Weight | 0.980 kg |
Material dimensions | 25x8 |
Assembly clearance | 35 |
Underbeam clearance without share | 270 |
Total height without share | 370 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Front gare tine
Part-no. | 2.1020RLL |
Weight | 1.000 kg |
Material dimensions | 25x8 |
Assembly clearance | 35 |
Underbeam clearance without share | 245 |
Total height without share | 342 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Upright gare tine
Part-no. | 2.1028 |
Weight | 0.960 kg |
Material dimensions | 25x8 |
Assembly clearance | 40 |
Underbeam clearance without share | 268 |
Total height without share | 368 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Straight harrow tine
Part-no. | 2.G63-A |
Weight | 1.665 kg |
Hole | 10,5 |
Material dimensions | 32x10 |
Notice: | The bolt with part no. 1045810 is supplied complete with nut. Still, we recommend securing the bolt with the nut, having part no. 410-1001! |
Assembly clearance | 40 |
Underbeam clearance without share | 250 |
Total height without share | 360 |
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Germinator gare tine with share
Part-no. | 2.G63-B |
Weight | 1.800 kg |
Material dimensions | 32x10 |
Assembly clearance | 40 |
Underbeam clearance without share | 220 |
Total height incl. share | 390 |
This set contains
Accessories
- 1.HH17-3413Clamp for tine 32x10
- 1.HH17Clamp for tine 32х10
- 1.HH17-3101Clamp for tine 32x10
- 1.10.130GStraight share
Holder
Share
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Gare tine
Part-no. | 2.J58 |
Weight | 0.600 kg |
Material dimensions | 20x6,5 |
Assembly clearance | 24 |
Underbeam clearance without share | 218 |
Total height without share | 296 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Back gare tine ZJ62
Part-no. | 2.J62 |
Weight | 1.520 kg |
Assembly clearance | 30 |
Total height incl. share | 320 |
Underbeam clearance with share | 234 |
This set contains
- 1 x 10509318Hexagon bolt M10x1,5x50 without nut
- 1 x 2.J62-1Share
- 1 x 2.J62-2Upper part
- 1 x 2.J62-3Clamp
- 1 x 30-MU10-2Self-locking nut M10
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Gare Tines - Cultivator Tines for Shallow Soil Cultivation for Seedbed Preparation
The online shop of Industriehof Scherenbostel offers Gare tines made of high-quality spring steel. The offered versions of the tines are compatible with all common systems, models, and brands in agriculture.
✓ Matching items for your brand | ✓ Detailed search by size |
✓ Spare parts in various versions | ✓ High availability & fast delivery |
Order Gare tines now from Industriehof Scherenbostel!
Gare Tines and Compatible Accessories for Various Manufacturers from Industriehof Scherenbostel
At Industriehof Scherenbostel, you will find Gare tines for fine cultivators and seedbed combination machines from all common agricultural machinery manufacturers. They serve as the connection between the share and the cultivator frame and are known for their particularly small material cross-section. With Gare tines, the seedbed is optimally prepared by crumb formation. Due to intensive working at a shallow depth of 2 to 6 cm, optimal water infiltration and good seed germination are achieved. In our online shop, you will find Gare tines for the following manufacturers:
✓ Doublet-Record
✓ Kongskilde
✓ Lemken
✓ Rabe
✓ Rau
In addition to Gare tines, Industriehof Scherenbostel offers a wide selection of other various cultivator tines:
- Heavy-duty cultivator tines
- Leaf spring tines
- Big spring tines
- Deep loosener tines
- Brake tines
- Cultivator tines
- Field harrow tines
- Row harrow tines
Additionally, you will find suitable Gare tine shares, holders for Gare tines, and accessories for Gare tines in our range.
Different Cultivator Tines for the Right Working Depth
When working the soil, it is important to choose the right cultivator tines. The deeper the cultivator is intended to penetrate the soil, the stronger the tines need to be. Additionally, the tractor power requirements - the required pull force - are significantly influenced by the alignment and position of the tines. The steeper the tip and the smaller the radius of the guide plate, the greater the force required.
Applications of the Cultivator and Cultivator Tines
A cultivator is used for loosening and crumbling the soil during seedbed preparation. In addition, it is used for weed control and incorporation of organic materials into the soil. Furthermore, the cultivator is needed for several other applications:
● Leveling ploughed fields to create an ideal, well-set, fine-crumbling seedbed
● Spreading slurry or manure with sufficient working depth and mixing effect
● Breaking up and loosening the topsoil, so that buried material does not resurface
● Stubble cultivation after harvest
● Creating firebreaks
Order Gare tines now!
Buy Gare Tines and Other Cultivator Wear Parts for Your Brand in Various Versions
Industriehof Scherenbostel is one of the leading suppliers of agricultural wear parts and always provides you with the right spare and wear parts for your cultivators. With years of experience in producing agricultural parts, the products from Industriehof Scherenbostel stand out for their highest quality and durability. In addition to cultivator tines such as the Gare tines, we also supply you with compatible cultivator shares. With a wide range of different versions and types, we offer the right share for every individual application:
Goosefoot share for the cultivator | ● Slightly penetrates the soil when dragged ● Furrow lies a few centimeters below the surface ● Topsoil is lifted but not turned |
Double heart share for the cultivator | ● Allows for intensive large-area cultivation ● Suitable for turning |
Cultivator wing share | ● Larger version of the goosefoot share ● Lifts topsoil without turning |
Unauthorized use of any of the drawings is a violation of copyright and will be prosecuted. The registrated trademark has been placed in our illustrations solely to protect them as part of our intellectual property.