Hatzenbichler - Cultivator parts
To scroll
01.21
Cultivators shanks, sweeps for cultivators and accessories
(1227)
Sweeps DuraFace Line
(43)
Big harrow tines,, shares and clamps
(155)
Spring tines, shares and accessories
(142)
Weeding and hoeing technology
(433)
Subsoiling shanks and accessories
(191)
Harrow tines, sweeps and accessories
(169)
Brake tines, shares and clamps
(86)
Quick change BOURGAULT system
(161)
Cultivator tines
(12)
Gare tines, sweeps and clamps
(32)
Clamps for harrow spring-tines
(211)
Clamps for double coil springs
(8)
Harrow teeth
(57)
Subsoilers
(12)
Quick change NICHOLS system
(34)
Straw tines
(8)
Stone collector
(3)
Bolts
(39)
Accessories for cultivator parts to fit
(43)
Cultivator parts to fit
(915)
Sweeps for cultivators
(248)
Cultivators shanks
(77)
Stone disengaging mechanism for cultivators tines
(17)
Double coil springs
(87)
Cultivator springiness with stone disengaging mechanism
(25)
Cultivator springiness with ridgid support
(12)
Accessories for cultivator springiness
(9)
Ridger share 210mm - right
| Part-no. | 1.10.1067 |
| Weight | 0.440 kg |
| Working width | 210 |
| Width | 70 |
| Thickness | 4 |
| Hole | 10 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ridger share 210mm - left
| Part-no. | 1.10.1068 |
| Weight | 0.440 kg |
| Working width | 210 |
| Width | 70 |
| Thickness | 4 |
| Hole | 10 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Crop protector disc - right
| Part-no. | 1.10.1141 |
| Weight | 3.570 kg |
| No. notches | 10 |
| Pitch circle diameter | Ø86 |
| Thickness | 3 |
| Hole | 10,7 |
| Diameter | 490 |
| Concavity | 40 |
Accessories
- 103093310Hexagon bolt M10x1,5x30 without nut
- 31-0781-4-86Bearing with thread M16
- 31-L1Bearing with thread M20x1,5
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Crop protector disc - left
| Part-no. | 1.10.1142 |
| Weight | 3.570 kg |
| No. notches | 10 |
| Pitch circle diameter | Ø86 |
| Thickness | 3 |
| Hole | 10,7 |
| Diameter | 490 |
| Concavity | 40 |
Accessories
- 103093310Hexagon bolt M10x1,5x30 without nut
- 31-0781-4-86Bearing with thread M16
- 31-L1Bearing with thread M20x1,5
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Spring 45x12
| Part-no. | 1.10.1184 |
| Weight | 3.700 kg |
| Height | 164 |
| Hole | 15 - 12,5x46 |
| Material dimensions | 45x12 |
| Total height without share | 270 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Tine
| Part-no. | 1.10.1185 |
| Weight | 1.100 kg |
| Length | 400 |
| Material dimensions | 11x32 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Standard share K46 70mm
| Part-no. | 1.10.131 |
| Weight | 0.220 kg |
| Length | 140 |
| Working width | 70 |
| Thickness | 4 |
| Work angle | 35° |
| Bolts for cultivators | M10 |
| Related parts |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Harrow tine
| Part-no. | 1.B242 |
| Weight | 5.500 kg |
| Material dimensions | 45x12 |
| Assembly clearance | 80 |
| Underbeam clearance without share | 470 |
| Total height incl. share | 675 |
| Underbeam clearance with share | 510 |
This set contains
Accessories
- 1.300821Reinforcing spring
- 1.KH6Jointer 200mm
- 1.10.131-6.1Standard share K46 70mm
- 1.HH17-3603Clamps for tine 45x12 with reinforcing spring 45x10
- 1.HH17-5052Clamp for tine 45x12
- 1.HH242-5050Clamps for tine 45x12
Reinforcing spring
Share
Holder
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Point
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Tine compl. without share
| Part-no. | 101.901.00 |
| Weight | 3.200 kg |
| Frame | 40x15 |
This set contains
- 1 x 101.901.01Spring
- 1 x 101.901.02Clamp
- 1 x 101.901.03Wedge
- 1 x 101.901.04Tine
- 1 x 101.901.06Holder
- 1 x 12409338Hexagon bolt M12x1,75x40 without nut - galvanized
- 1 x 63-1035Hexagon bolt M10x1,5x35 with self-locking nut
- 1 x 63-1240Hexagon Bolt M12x1,75x40 with self-locking nut
- 1 x 76-16Split pin
Accessories
- 101.IND-9011Sweep 250mm
- 101.IND-9010Sweep 150mm
- 101.IND-9009Sweep 200mm
- 51-1055Clamping pin - Ø6x20
Share
Sonstiges Zubehör
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Spring
| Part-no. | 101.901.01 |
| Weight | 1.780 kg |
| Height | 110 |
| Hole | 12,5 - 10x32 |
| Material dimensions | 32x12 |
| Total height without share | 180 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Clamp
| Part-no. | 101.901.02 |
| Weight | 0.190 kg |
| Hole | 10,5 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Wedge
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Tine
| Part-no. | 101.901.04 |
| Weight | 0.810 kg |
| Length | 360 |
| Hole spacing | 16 |
| Hole | 6,5 |
| Material dimensions | 32x10 |
Accessories
- 101.IND-9011Sweep 250mm
- 101.IND-9010Sweep 150mm
- 101.IND-9009Sweep 200mm
- 51-1055Clamping pin - Ø6x20
Share
Sonstiges Zubehör
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holder
| Part-no. | 101.901.06 |
| Weight | 0.140 kg |
| Hole | 12,5 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Sweep 200mm
| Part-no. | 101.IND-717 |
| Weight | 0.810 kg |
| Working width | 200 |
| Hole spacing | 30 |
| Thickness | 5 |
| Hole | 11x16 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Sweep 200mm
| Part-no. | 101.IND-9009 |
| Weight | 0.595 kg |
| Working width | 200 |
| Hole spacing | 16 |
| Thickness | 3 |
| Work angle | 40° |
| Hole | 6 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Sweep 150mm
| Part-no. | 101.IND-9010 |
| Weight | 0.400 kg |
| Working width | 150 |
| Hole spacing | 16 |
| Thickness | 3 |
| Work angle | 40° |
| Hole | 6 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Sweep 250mm
| Part-no. | 101.IND-9011 |
| Weight | 0.640 kg |
| Working width | 250 |
| Hole spacing | 16 |
| Thickness | 3 |
| Work angle | 40° |
| Hole | 6 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Sweep 300mm
| Part-no. | 101.IND-9012 |
| Weight | 0.700 kg |
| Working width | 300 |
| Hole spacing | 16 |
| Thickness | 3 |
| Work angle | 40° |
| Hole | 6 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Unauthorized use of any of the drawings is a violation of copyright and will be prosecuted. The registrated trademark has been placed in our illustrations solely to protect them as part of our intellectual property.