Mounted heavy harrows
| Part-no. | 10.64102 |
| Weight | 72.000 kg |
| Working width | 2000 |
| Please see: | Assembling instruction |
Accessories
Part fitting for machine…
| Adaptable for | Orig.part n° |
|---|
IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.
| Part-no. | 10.852001 |
| Weight | 15.220 kg |
| Frame | 80x80 |
| Important notice: | for correct functioning, these units must be assembled in pairs! |
This set contains
- 2x 10.211074 Pin
- 1x 10.353547 Harrow tine mount
- 1x 10.353548 Extension tube 50x50
- 1x 10.353549 Incline adjuster
- 1x 10.610008 Pin
- 1x 10.ST-HH-38 Holder 107x45
- 2x 101.211015 Stirrup bolt 81x120 for 80x80 frame
- 4x 1610093110 Hexagon bolt M16x2x100 without nut
- 4x 30-MU16-2 Self-locking nut - M16x2
- 4x 30-U-16 Split washer Ø27x4xØ16
- 8x 63-DÜC-908 Washer Ø30x3xØ17
- 3x 66115A Single spring spin
Accessories
- 30-101-6 Stirrup bolt - M12x1,75
- 30-101-25 Stirrup bolt - M12x1,75
- 10.ST-HH-1 Washer
- 10.ST-HH-2 Washer
- 10.ST-HH-16 Holding
- 10.ST-HH-23 Ledger plate
- 10.ST-HH-24 Washer Ø30x2,5xØ10,5
- 10.ST-HH-25 Holder
- 10.ST-HH-30 Ledger plate
- 10.ST-HH-38 Holder 107x45
- 10.ST-DO-1 Following tine
- 10.ST-GU-2 Following tine
- 10.ST-GU-3 Following tine
- 10.ST-JD1 Following tine
- 10.ST-K-4 Following tine
- 10.ST-K1 Following tine
- 10.ST-K2 Following tine
- 10.ST-K3 Following tine
- 10.ST-KV-5 Following tine, right model
- 10.ST-KV-6 Following tine, left model
- 10.ST-KV-1 Following tine - Kvik-Fin
- 10.ST-KÖ-2 Following tine
- 10.ST-KÖ-4 Following tine
- 10.ST-KÖ-5 Following tine
- 10.ST-KÖ-7 Following tine
- 10.ST-KÖ-8 Following tine
- 10.ST-MS-3 Following tine
- 10.ST-MS-4 Following tine
- 10.ST-MS1 Following tine
- 10.ST-NO Following tine
- 10.ST-NS1 Following tine
- 10.ST-RA-9 Following tine
- 10.ST-SI Following tine
- 10.ST-SI-1 Following tine
- 10.ST-SI-2 Following tine
- 10.ST-SI-4 Following tine
- 10.ST-SI-5 Following tine
Holder
Harrow tines
Part fitting for machine…
| Adaptable for | Orig.part n° |
|---|
IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.
The trade mark has been placed in our illustrations with the sole aim of protecting our illustrations as part of our intellectual property.
){kind=link}
© 2001-2024 Industriehof Scherenbostel Heinrich Rodenbostel GmbH. All rights reserved. Duplication only with agreement with Industriehof Scherenbostel Heinrich Rodenbostel GmbH. The Industriehof Scherenbostel Heinrich Rodenbostel GmbH is not responsible for the contents of external Internet pages.