Kuhn plow parts
Plow Parts according to brand
(1189)
Manure and grassland skimmers to brand
(178)
Coulters NIAUX to fit
(14)
Disc coulters bearings according to brand
(7)
Welding points
(4)
Accessories for plow parts
(14)
Agrolux plow parts
(73)
Amazone plow parts Cayros M - XM - XMS - XS - XSpro
(65)
Fiskars plow parts
(12)
Frost plow parts
(65)
Grégoire Besson plow parts
(90)
Krone plow parts
(30)
Kuhn plow parts
(110)
Kverneland plow parts
(103)
Lemken plow parts
(130)
Massey Ferguson plow parts
(59)
Naud plow parts
(19)
Niemeyer plow parts
(78)
Pöttinger plow parts
(51)
Rabe plow parts
(112)
Vogel u. Noot plow parts
(125)
Överum plow parts
(96)
Assorted plow parts to fit brands
(215)
Plow parts UNIVERSAL
(8)
Agrolux plow parts
(6)
Amazone plow parts
(10)
Eberhardt plow parts
(4)
ER.MO plow parts
(12)
Fiskars plow parts
(2)
Frost plow parts
(4)
Gassner plow parts
(1)
Goizin plow parts
(2)
Grégoire Besson plow parts
(13)
Kongskilde plow parts
(2)
Krone plow parts
(2)
Kubota plow parts
(2)
Kuhn plow parts
(34)
Kverneland plow parts
(8)
Lemken plow parts
(10)
Maschio / Gaspardo plow parts
(8)
Moro Aratri plow parts
(2)
Överum plow parts
(5)
OVLAC plow parts
(21)
PLN plow parts
(1)
Pöttinger plow parts
(26)
Rabe plow parts
(34)
Regent plow parts
(6)
Unia plow parts
(8)
Vogel u. Noot plow parts
(7)
Landside - right
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Landside - left
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Landside - right
| Part-no. | 34.0028 |
| Weight | 5.830 kg |
| Hole spacing | 292 - 210 - 207 - 242 - 250 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Landside - left
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Landside - right
| Part-no. | 34.0030 |
| Weight | 4.670 kg |
| fit for: | Body Type all-purpose |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Landside - left
| Part-no. | 34.0031 |
| Weight | 4.670 kg |
| fit for: | Body Type all-purpose |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Cast heel - right
| Part-no. | 34.0080 |
| Weight | 1.750 kg |
| fit for: | Body Type all-purpose |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Cast heel - left
| Part-no. | 34.0081 |
| Weight | 1.750 kg |
| fit for: | Body Type all-purpose |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard - right
| Part-no. | 34.0100 |
| Weight | 13.600 kg |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard - left
| Part-no. | 34.0101 |
| Weight | 13.600 kg |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard - right
| Part-no. | 34.0102 |
| Weight | 15.200 kg |
| Hole spacing | 49,5 - 205 - 162 - 96 - 86,5 - 285 |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
| fit for: | Body Type RH |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard - left
| Part-no. | 34.0103 |
| Weight | 15.200 kg |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
| fit for: | Body Type RH |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard - right
| Part-no. | 34.0110 |
| Weight | 12.800 kg |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
| fit for: | Body Type C4 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard - left
| Part-no. | 34.0111 |
| Weight | 12.800 kg |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
| fit for: | Body Type C4 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard - right
| Part-no. | 34.0112 |
| Weight | 12.000 kg |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard - left
| Part-no. | 34.0113 |
| Weight | 12.000 kg |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard - right
| Part-no. | 34.0114 |
| Weight | 15.800 kg |
| Hole spacing | 50 - 266 - 87 - 95 - 162 |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
| fit for: | Body Type RL |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard - left
| Part-no. | 34.0115 |
| Weight | 15.800 kg |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
| fit for: | Body Type RL |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Shin - right
| Part-no. | 34.0146 |
| Weight | 1.340 kg |
| Hole spacing | 145 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Shin - left
| Part-no. | 34.0147 |
| Weight | 1.340 kg |
| Hole spacing | 145 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Shin - right
| Part-no. | 34.0150 |
| Weight | 1.270 kg |
| fit for: | Body Type N14 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Shin - left
| Part-no. | 34.0151 |
| Weight | 1.270 kg |
| fit for: | Body Type N14 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Reversible point share - 14'' - right
| Part-no. | 34.0172 |
| Weight | 7.200 kg |
| Hole spacing | 200 - 52,5 |
| fit for: | Body Type RH |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Reversible point share - 14'' - left
| Part-no. | 34.0173 |
| Weight | 7.200 kg |
| Hole spacing | 200 - 52,5 |
| fit for: | Body Type RH |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Reversible point share - 16'' - right
| Part-no. | 34.0174 |
| Weight | 7.970 kg |
| Hole spacing | 100 - 200 - 52,5 |
| fit for: | Body Type RH |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Reversible point share - 16'' - right - Hard metal
| Part-no. | 34.0174-EXT |
| Weight | 9.560 kg |
| Type | Hard metal |
| Hole spacing | 45 - 60 - 100 - 200 |
| Hole | 12,5 |
| fit for: | Body Type RH |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Reversible point share - 16'' - left
| Part-no. | 34.0175 |
| Weight | 7.970 kg |
| Hole spacing | 100 - 200 - 52,5 |
| fit for: | Body Type RH |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Reversible point share - 16'' - left - Hard metal
| Part-no. | 34.0175-EXT |
| Weight | 9.560 kg |
| Type | Hard metal |
| Hole spacing | 45 - 60 - 100 - 200 |
| Hole | 12,5 |
| fit for: | Body Type RH |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Bar point 28x28
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Shin - right
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Shin - left
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard extension - right/left
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Landside
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Trash board - right-left
| Part-no. | 34.0255 |
| Weight | 3.320 kg |
| Length | 486 |
| Hole spacing | 75 |
| fit for: | Body Type HC4 - N4 - SK - VLP |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Unauthorized use of any of the drawings is a violation of copyright and will be prosecuted. The registrated trademark has been placed in our illustrations solely to protect them as part of our intellectual property.