Plow parts UNIVERSAL
Landside - right
| Part-no. | 33.0156 |
| Weight | 0.730 kg |
| Length | 200 |
| Hole spacing | 62 |
| Width | 80 |
| Thickness | 8 |
| Hole | 11 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Landside - left
| Part-no. | 33.0157 |
| Weight | 0.730 kg |
| Length | 200 |
| Hole spacing | 62 |
| Width | 80 |
| Thickness | 8 |
| Hole | 11 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Share 275 - right
| Part-no. | 33.0158 |
| Weight | 1.360 kg |
| Length | 275 |
| Hole spacing | 110 |
| Width | 95 |
| Thickness | 8 |
| Hole | 11 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Share 275 - left
| Part-no. | 33.0159 |
| Weight | 1.360 kg |
| Length | 275 |
| Hole spacing | 110 |
| Width | 95 |
| Thickness | 8 |
| Hole | 11 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard - right
| Part-no. | 33.0160 |
| Weight | 2.340 kg |
| Hole spacing | 110 |
| Thickness | 5 |
| Hole | 12 |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard - left
| Part-no. | 33.0161 |
| Weight | 2.340 kg |
| Hole spacing | 110 |
| Thickness | 5 |
| Hole | 12 |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Saddle right
| Part-no. | 33.0162 |
| Weight | 3.370 kg |
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Saddle left
| Part-no. | 33.0163 |
| Weight | 3.370 kg |
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Unauthorized use of any of the drawings is a violation of copyright and will be prosecuted. The registrated trademark has been placed in our illustrations solely to protect them as part of our intellectual property.