Rabe plow parts
Plow Parts according to brand
(1189)
Manure and grassland skimmers to brand
(174)
Coulters NIAUX to fit
(14)
Disc coulters bearings according to brand
(7)
Welding points
(4)
Accessories for plow parts
(14)
Agrolux plow parts
(73)
Amazone plow parts Cayros M - XM - XMS - XS - XSpro
(65)
Fiskars plow parts
(12)
Frost plow parts
(65)
Grégoire Besson plow parts
(90)
Krone plow parts
(30)
Kuhn plow parts
(110)
Kverneland plow parts
(103)
Lemken plow parts
(130)
Massey Ferguson plow parts
(59)
Naud plow parts
(19)
Niemeyer plow parts
(78)
Pöttinger plow parts
(51)
Rabe plow parts
(112)
Vogel u. Noot plow parts
(125)
Överum plow parts
(96)
Assorted plow parts to fit brands
(215)
Plow parts UNIVERSAL
(8)
Moldboard HRP-235O - right
| Part-no. | 37.0043 |
| Weight | 10.200 kg |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard HRP-235OL - left
| Part-no. | 37.0044 |
| Weight | 10.200 kg |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard HRP-295O - right
| Part-no. | 37.0045 |
| Weight | 13.460 kg |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard HRP-295OL - left
| Part-no. | 37.0046 |
| Weight | 13.460 kg |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard HRP-326P - right
| Part-no. | 37.0049 |
| Weight | 16.600 kg |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
| fit for: | Body Type BP-320 P v / UBP-320 P / BP-321 P v / BP-321 P / UBP-321 P / SBP-321 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard HRP-326PL - left
| Part-no. | 37.0050 |
| Weight | 16.600 kg |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
| fit for: | Body Type BP-320 P v / UBP-320 P / BP-321 P v / BP-321 P / UBP-321 P / SBP-321 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard HRP-297R - right
| Part-no. | 37.0051 |
| Weight | 12.600 kg |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
| fit for: | Body Type BP-293 R / BP-294 R |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard HRP-297RL - left
| Part-no. | 37.0052 |
| Weight | 12.600 kg |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
| fit for: | Body Type BP-293 R / BP-294 R |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard HRP-236O - right
| Part-no. | 37.0055 |
| Weight | 10.100 kg |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
| fit for: | Body Type BP-232 O - BP233 O |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard HRP-236OL - left
| Part-no. | 37.0056 |
| Weight | 10.100 kg |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
| fit for: | Body Type BP-232 O - BP233 O |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard HRP-327P - right
| Part-no. | 37.0057 |
| Weight | 16.200 kg |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
| fit for: | Body Type BP-320 P v / UBP-320 P / BP-321 P v / BP-321 P / UBP-321 P / SBP-321 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard HRP-327PL - left
| Part-no. | 37.0058 |
| Weight | 16.200 kg |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
| fit for: | Body Type BP-320 P v / UBP-320 P / BP-321 P v / BP-321 P / UBP-321 P / SBP-321 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard HRP-350O - right
| Part-no. | 37.0083 |
| Weight | 18.800 kg |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
| fit for: | Body Type BP-350 O / BP-351 O |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard HRP-350OL - left
| Part-no. | 37.0084 |
| Weight | 18.800 kg |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
| fit for: | Body Type BP-350 O / BP-351 O |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Shin VRP350O - right
| Part-no. | 37.0095 |
| Weight | 2.180 kg |
| fit for: | Body Type BP-350 WS / BP-351 WS |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
ShinVRP350OL - left
| Part-no. | 37.0096 |
| Weight | 2.180 kg |
| fit for: | Body Type BP-350 WS / BP-351 WS |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Shin VRP342RR - right
| Part-no. | 37.0119 |
| Weight | 2.350 kg |
| Thickness | 10mm |
| Hole spacing | 96 - 160 |
| fit for: | Body Type BP-321PS(L) - BP-322PS(L) - BP-323PS(L) - BP-324PS(L) - BP-353RS - BP-354RS |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Shin VRP342RL - left
| Part-no. | 37.0120 |
| Weight | 2.350 kg |
| Thickness | 10mm |
| Hole spacing | 96 - 160 |
| fit for: | Body Type BP-321PS(L) - BP-322PS(L) - BP-323PS(L) - BP-324PS(L) - BP-353RS - BP-354RS |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Shin VRP342O - 8mm - right
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Shin VRP342OL - left
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Shin VRP300O - 8mm - right
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Shin VRP300OL - left
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard HRP-300O - right
| Part-no. | 37.0141 |
| Weight | 10.100 kg |
| Hole spacing | 65 - 85 - 65 - 110 - 210 |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
| fit for: | Body Type BP-300 O / BP-301 O / BP-302 O / BP-303 O |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard HRP-300OL - left
| Part-no. | 37.0142 |
| Weight | 10.100 kg |
| Hole spacing | 65 - 85 - 65 - 110 - 210 |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
| fit for: | Body Type BP-300 O / BP-301 O / BP-302 O / BP-303 O |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Landside VP300O - right
| Part-no. | 37.0161 |
| Weight | 2.150 kg |
| fit for: | Body Type BP-302 O / BP-303 O |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Landside VP300OL - left
| Part-no. | 37.0162 |
| Weight | 2.150 kg |
| fit for: | Body Type BP-302 O / BP-303 O |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Landside VP300O - right
| Part-no. | 37.0163 |
| Weight | 3.700 kg |
| fit for: | Body Type WP300O / WP300OL |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Landside VP300OL - left
| Part-no. | 37.0164 |
| Weight | 3.700 kg |
| fit for: | Body Type WP300O / WP300OL |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Shin VRP320W - right
| Part-no. | 37.0168 |
| Weight | 1.860 kg |
| fit for: | Body Type BP-320 W / BP-321 W |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Shin VRP320WL - left
| Part-no. | 37.0169 |
| Weight | 1.860 kg |
| fit for: | Body Type BP-320 W / BP-321 W |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Shin VRP340W - right
| Part-no. | 37.0178 |
| Weight | 1.990 kg |
| fit for: | Body Type BP-340 W / BP-341 W |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Shin VRP340WL - left
| Part-no. | 37.0179 |
| Weight | 1.990 kg |
| fit for: | Body Type BP-340 W / BP-341 W |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Trash board PDG-52 - right
| Part-no. | 37.0180 |
| Weight | 4.450 kg |
| fit for: | Body Type DG-5 / DG-51U / DG-52 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Trash board PDG-52L - left
| Part-no. | 37.0181 |
| Weight | 4.450 kg |
| fit for: | Body Type DG-5 / DG-51U / DG-52 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Unauthorized use of any of the drawings is a violation of copyright and will be prosecuted. The registrated trademark has been placed in our illustrations solely to protect them as part of our intellectual property.