ER.MO plow parts
Plow Parts according to brand
(1189)
Manure and grassland skimmers to brand
(174)
Coulters NIAUX to fit
(14)
Disc coulters bearings according to brand
(7)
Welding points
(4)
Accessories for plow parts
(14)
Agrolux plow parts
(73)
Amazone plow parts Cayros M - XM - XMS - XS - XSpro
(65)
Fiskars plow parts
(12)
Frost plow parts
(65)
Grégoire Besson plow parts
(90)
Krone plow parts
(30)
Kuhn plow parts
(110)
Kverneland plow parts
(103)
Lemken plow parts
(130)
Massey Ferguson plow parts
(59)
Naud plow parts
(19)
Niemeyer plow parts
(78)
Pöttinger plow parts
(51)
Rabe plow parts
(112)
Vogel u. Noot plow parts
(125)
Överum plow parts
(96)
Assorted plow parts to fit brands
(215)
Plow parts UNIVERSAL
(8)
Reversible point 120x15 - right
| Part-no. | 54.0000 |
| Weight | 4.125 kg |
| Hole spacing | 125 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Reversible point 120x15 - left
| Part-no. | 54.0001 |
| Weight | 4.125 kg |
| Hole spacing | 125 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Share wing - right
| Part-no. | 54.0002 |
| Weight | 4.310 kg |
| Hole spacing | 140 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Share wing - left
| Part-no. | 54.0003 |
| Weight | 4.310 kg |
| Hole spacing | 140 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard - right
| Part-no. | 54.0004 |
| Weight | 14.600 kg |
| Hole spacing | 82-170-85 |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard - left
| Part-no. | 54.0005 |
| Weight | 14.600 kg |
| Hole spacing | 82-170-85 |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard - right
| Part-no. | 54.0006 |
| Weight | 18.200 kg |
| Hole spacing | 81-199-140 |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Moldboard - left
| Part-no. | 54.0007 |
| Weight | 18.200 kg |
| Hole spacing | 81-199-140 |
| Assembly instructions | When replacing moldboards and moldboard slats damping washers are imperatively to be used when tightening nuts and bolts. The damping washers are to be placed under the nuts, which are to be tightened by hand, without the use of an air gun, thereby avoiding causing cracks in the material of the slats or moldboards. To further avoid causing tension and cracks in the material, take care to tighten the nuts and bolts by alternating back and forth between various mounting points. |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Landside 480x10 - right
| Part-no. | 54.0010 |
| Weight | 9.410 kg |
| Hole spacing | 200 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Landside 480x10 - left
| Part-no. | 54.0011 |
| Weight | 9.410 kg |
| Hole spacing | 200 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Landside 800x12 - right
| Part-no. | 54.0012 |
| Weight | 19.780 kg |
| Hole spacing | 200 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Landside 800x12 - left
| Part-no. | 54.0013 |
| Weight | 18.780 kg |
| Hole spacing | 200 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Unauthorized use of any of the drawings is a violation of copyright and will be prosecuted. The registrated trademark has been placed in our illustrations solely to protect them as part of our intellectual property.