Kverneland

Part-no. 31-L16
Weight 3.400 kg
Pitch circle diameter Ø100
Accessories
Part fitting for machine…
Adaptable forOrig.part n°
Kverneland KK086087R / A133120730


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

Part-no. 31-L17
Weight 2.090 kg
Pitch circle diameter Ø80
Attention!! The bearing is delivered without grease lubrication!
Important notice:
Important notice 1 The hub 31-L17 is a hub designed plow coulters. As such, it is not designed to absorb lateral forces, and is suited only for straight directions of drive.
Important notice 2 The hub 31-L17 contains a needle bearing which is supported, closed and sealed on both sides by the housing and the hub cap. For this reason, a maximum of only one dose of grease may be applied into the hub. Otherwise, damage may occur in the hub.
Accessories
Part fitting for machine…
Adaptable forOrig.part n°
Kverneland 060609


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

Part-no. 31-L17A
Weight 1.920 kg
Pitch circle diameter Ø80
Attention!! The bearing is delivered without grease lubrication!
Accessories
Part fitting for machine…
Adaptable forOrig.part n°
Kverneland 060624


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

The trade mark has been placed in our illustrations with the sole aim of protecting our illustrations as part of our intellectual property.