Accessories for top hooks
Top-links and accessories
(682)
Top-hooks
(55)
Hydraulic top-links and accessories
(112)
Ball and bushes
(43)
Whoa-Stop
(20)
Quick coupler
(21)
Automatic hooks for lower links and accessories
(96)
Hooks for front power lift
(8)
Ball joint terminals
(79)
Top- an lower- link pins
(120)
Cross bars
(8)
Adjustable levelling assembly
(8)
stabilizer chains
(11)
Turnbuckles
(9)
Trailing security pins
(5)
Trailer coupling rings
(30)
Parking jacks
(4)
Washlockers
(18)
Triangular coupling device
(26)
Top-hooks Category I
(2)
Top-hooks Category II
(11)
Top-hooks Category III
(10)
Top-hooks Category IV
(1)
Accessories for top hooks
(31)
Spring for top hooks, old model
| Part-no. | 652-C623 |
| Weight | 0.015 kg |
| Category | III-II |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Lever for top hooks, old model
| Part-no. | 652-C624 |
| Weight | 0.190 kg |
| Category | III-II |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Roller pin for top hooks, old model
| Part-no. | 652-C627 |
| Weight | 0.003 kg |
| Category | III-II |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Spring for top hooks Cat. IV
| Part-no. | 652-C646 |
| Weight | 0.001 kg |
| Category | IV |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat. III-II
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat. III-II - BLACK LINE
| Part-no. | 652-C652.1 |
| Weight | 0.670 kg |
| Category | III-II |
| Width | 51 |
| Hole | 25,5 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 60 |
| Alternatives | Show |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat. III
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat. III - BLACK LINE
| Part-no. | 652-C656.1 |
| Weight | 0.540 kg |
| Category | III |
| Width | 51 |
| Hole | 32,5 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 60 |
| Alternatives | Show |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Security pin for top hooks, new model
| Part-no. | 652-C707 |
| Weight | 0.220 kg |
| Category | III-II |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Lever for top hooks CAT IV
| Part-no. | 652-C708 |
| Weight | 0.250 kg |
| Category | IV |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Security pin for top hooks Cat. IV
| Part-no. | 652-C709 |
| Weight | 0.450 kg |
| Category | IV |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat.II
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat. II - BLACK LINE
| Part-no. | 652-D752.1 |
| Weight | 0.350 kg |
| Category | II |
| Width | 51 |
| Hole | 25,8 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 50 |
| Alternatives | Show |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Bolt for top hooks, old model
| Part-no. | 652-D944 |
| Weight | 0.008 kg |
| Category | II |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Nut for top hooks, old model
| Part-no. | 652-D945 |
| Weight | 0.015 kg |
| Category | II |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Roller pin for top hooks, old model
| Part-no. | 652-D946 |
| Weight | 0.003 kg |
| Category | II |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Security pin for top hooks, new model
| Part-no. | 652-D948 |
| Weight | 0.160 kg |
| Category | II and III-II |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Spring for top hooks, new model
| Part-no. | 652-D949 |
| Weight | 0.012 kg |
| Category | II and III-II |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Lever for top hooks, new model
| Part-no. | 652-D951 |
| Weight | 0.120 kg |
| Category | II and III-II |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Roller pin for top hooks, new model
| Part-no. | 652-D952 |
| Weight | 0.020 kg |
| Category | II and III-II |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Roller pin for top hooks, new model
| Part-no. | 652-D953 |
| Weight | 0.004 kg |
| Category | II and III-II |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Roller pin for top hooks, new model
| Part-no. | 652-D955 |
| Weight | 0.002 kg |
| Category | II and III-II |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat.I
| Part-no. | 652-E006 |
| Weight | 0.170 kg |
| Category | I |
| Width | 44 |
| Hole | 19,1 |
| Outside diameter | 38 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat.IV-III
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat. III-IV - BLACK LINE
| Part-no. | 652-R32-4.1 |
| Weight | 1.450 kg |
| Category | IV-III |
| Width | 63 |
| Hole | 32 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 78 |
| Alternatives | Show |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat.IV
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat. IV - BLACK LINE
| Part-no. | 652-R45-4.1 |
| Weight | 1.090 kg |
| Category | IV |
| Width | 63 |
| Hole | 45,5 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 77,5 |
| Alternatives | Show |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat. III HD
| Part-no. | 652-RS32 |
| Weight | 0.570 kg |
| Category | III |
| Width | 51 |
| Hole | 32 |
| Please see: | Information |
| Outside diameter | 60 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Reduction bush for top hook balls Cat.II-I
| Part-no. | 658-19 |
| Weight | 0.080 kg |
| Length | 50 |
| Category | II-I |
| Hole | 19,4 |
| Outside diameter | 25 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Reduction bush for top hook balls Cat.II-I
| Part-no. | 658-19-K |
| Weight | 0.070 kg |
| Length | 45 |
| Category | II-I |
| Hole | 19,4 |
| Outside diameter | 25 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Reduction bush for top hook balls Cat.III-II
| Part-no. | 658-25 |
| Weight | 0.100 kg |
| Length | 51 |
| Category | III-II |
| Hole | 25,4 |
| Outside diameter | 31,5 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Unauthorized use of any of the drawings is a violation of copyright and will be prosecuted. The registrated trademark has been placed in our illustrations solely to protect them as part of our intellectual property.