Ball and bushes
Top-links and accessories
(684)
Top-hooks
(55)
Hydraulic top-links and accessories
(110)
Ball and bushes
(43)
Whoa-Stop
(20)
Quick coupler
(21)
Automatic hooks for lower links and accessories
(96)
Hooks for front power lift
(8)
Ball joint terminals
(79)
Top- an lower- link pins
(120)
Cross bars
(8)
Adjustable levelling assembly
(8)
stabilizer chains
(11)
Turnbuckles
(9)
Trailing security pins
(5)
Trailer coupling rings
(29)
Parking jacks
(4)
Washlockers
(17)
Triangular coupling device
(26)
Cone without ball Cat. II for lower hooks
| Part-no. | 652-A115 |
| Weight | 0.400 kg |
| Category | II |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Reduction cone Cat. II-I for lower hooks
| Part-no. | 652-A16 |
| Weight | 0.560 kg |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for lower link hooks - Cat. III-II - BLACK LINE
| Part-no. | 652-C602.1 |
| Weight | 0.710 kg |
| Category | III-II |
| Width | 45 |
| Hole | 28,5 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 64 |
| Alternatives | Show |
| Cross reference: | 1099039 / 099039 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for lower link hooks - Cat. III-II
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for lower link hooks - Cat. III - BLACK LINE
| Part-no. | 652-C603.1 |
| Weight | 0.560 kg |
| Category | III |
| Width | 45 |
| Hole | 51 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 85 |
| Alternatives | Show |
| Cross reference: | 1099038 / 099038 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for lower link hook Cat. III
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball guide cone Cat.III-II with linch pin
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball guide cone Cat. III-II with linch pin - BLACK LINE
| Part-no. | 652-C621.1 |
| Weight | 1.100 kg |
| Category | II-III |
| Hole | 28,4 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 64 |
| Alternatives | Show |
| Cross reference: | 1099035 / 099035 |
This set contains
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Cone without ball Cat. III for lower hooks
| Part-no. | 652-C635 |
| Weight | 0.450 kg |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat. III-II
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat. III-II - BLACK LINE
| Part-no. | 652-C652.1 |
| Weight | 0.670 kg |
| Category | III-II |
| Width | 51 |
| Hole | 25,5 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 60 |
| Alternatives | Show |
| Cross reference: | 1099044 / 099044 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat. III
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat. III - BLACK LINE
| Part-no. | 652-C656.1 |
| Weight | 0.540 kg |
| Category | III |
| Width | 51 |
| Hole | 32,5 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 60 |
| Alternatives | Show |
| Cross reference: | 1099043 / 099043 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball guide cone with linch pin Cat. III
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball guide cone Cat.III with linch pin - BLACK LINE
| Part-no. | 652-C661.1 |
| Weight | 1.100 kg |
| Category | III |
| Hole | 37 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 64 |
| Alternatives | Show |
| Cross reference: | 1099033 / 099033 |
This set contains
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for lower link hooks - Cat. II - BLACK LINE
| Part-no. | 652-D702.1 |
| Weight | 0.450 kg |
| Category | II |
| Width | 45 |
| Hole | 28,8 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 56 |
| Alternatives | Show |
| Cross reference: | 1099037 / 099037 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for lower link hook - Cat. II
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for lower links hooks - Cat. II-I
| Part-no. | 652-D703A |
| Weight | 0.450 kg |
| Category | II-I |
| Width | 45 |
| Hole | 22,1 |
| Outside diameter | 56 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball guide cone with linch pin Cat. II
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball guide cone Cat.II with linch pin - BLACK LINE
| Part-no. | 652-D721.1 |
| Weight | 0.940 kg |
| Category | II |
| Hole | 28,4 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 56 |
| Alternatives | Show |
| Cross reference: | 1099032 / 099032 |
This set contains
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat.II
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat. II - BLACK LINE
| Part-no. | 652-D752.1 |
| Weight | 0.350 kg |
| Category | II |
| Width | 51 |
| Hole | 25,8 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 50 |
| Alternatives | Show |
| Cross reference: | 1099042 / 099042 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball guide cone with linch pin Cat. II/l
| Part-no. | 652-D956 |
| Weight | 0.990 kg |
| Category | II-I |
| Hole | 22,5 |
| Outside diameter | 56 |
This set contains
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat.I
| Part-no. | 652-E006 |
| Weight | 0.170 kg |
| Category | I |
| Width | 44 |
| Hole | 19,1 |
| Outside diameter | 38 |
| Cross reference: | 1305277 / 305277 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball guide cone with linch pin Cat. I
| Part-no. | 652-E821 |
| Weight | 0.740 kg |
| Category | I |
| Hole | 22,5 |
| Outside diameter | 44 |
| Cross reference: | 1305209 / 305209 |
This set contains
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for lower links hooks - Cat. IV-III
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for lower links hooks - Cat. IV-III - BLACK LINE
| Part-no. | 652-F602.1 |
| Weight | 1.650 kg |
| Category | III-IV |
| Width | 57 |
| Hole | 37 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 85 |
| Alternatives | Show |
| Cross reference: | 1200049 / 200049 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for lower links hooks - Cat. IV
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for lower links hooks - Cat. IV - BLACK LINE
| Part-no. | 652-F603.1 |
| Weight | 1.220 kg |
| Category | IV |
| Width | 57 |
| Hole | 51 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 85 |
| Alternatives | Show |
| Cross reference: | 1306330 / 306330 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat.IV-III
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat. III-IV - BLACK LINE
| Part-no. | 652-R32-4.1 |
| Weight | 1.450 kg |
| Category | IV-III |
| Width | 63 |
| Hole | 32 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 78 |
| Alternatives | Show |
| Cross reference: | 1205125 / 205125 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat.IV
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat. IV - BLACK LINE
| Part-no. | 652-R45-4.1 |
| Weight | 1.090 kg |
| Category | IV |
| Width | 63 |
| Hole | 45,5 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 77,5 |
| Alternatives | Show |
| Cross reference: | 1204783 / 204783 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for lower link hook Cat. III HD
| Part-no. | 652-RI37 |
| Weight | 0.570 kg |
| Category | III |
| Width | 45 |
| Hole | 37 |
| Please see: | Information |
| Outside diameter | 64 |
| Cross reference: | 1202332 / 202332 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat. III HD
| Part-no. | 652-RS32 |
| Weight | 0.570 kg |
| Category | III |
| Width | 51 |
| Hole | 32 |
| Please see: | Information |
| Outside diameter | 60 |
| Cross reference: | 1202484 / 202484 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for lower links hooks - Cat. II-I
| Part-no. | 652-U21 |
| Weight | 0.450 kg |
| Category | II-I |
| Width | 35 |
| Hole | 22,5 |
| Notice: | General informations |
| Outside diameter | 56 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Reduction bush for top hook balls Cat.II-I
| Part-no. | 658-19 |
| Weight | 0.080 kg |
| Length | 50 |
| Category | II-I |
| Hole | 19,4 |
| Outside diameter | 25 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Reduction bush for top hook balls Cat.II-I
| Part-no. | 658-19-K |
| Weight | 0.070 kg |
| Length | 45 |
| Category | II-I |
| Hole | 19,4 |
| Outside diameter | 25 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Reduction bush Cat. II-I
| Part-no. | 658-22 |
| Weight | 0.080 kg |
| Length | 44 |
| Category | II-I |
| Hole | 22,5 |
| Outside diameter | 28 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Reduction bush Cat. II-I
| Part-no. | 658-221 |
| Weight | 0.085 kg |
| Length | 60 |
| Category | II-I |
| Hole | 22,5 |
| Outside diameter | 28 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Reduction bush for top hook balls Cat.III-II
| Part-no. | 658-25 |
| Weight | 0.100 kg |
| Length | 51 |
| Category | III-II |
| Hole | 25,4 |
| Outside diameter | 31,5 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Reduction bush Cat. III-II
| Part-no. | 658-28 |
| Weight | 0.140 kg |
| Length | 52 |
| Category | III-II |
| Hole | 29 |
| Outside diameter | 36,5 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Reduction bush Cat. III-II
| Part-no. | 658-281 |
| Weight | 0.190 kg |
| Length | 64 |
| Category | III-II |
| Hole | 28 |
| Outside diameter | 36 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Unauthorized use of any of the drawings is a violation of copyright and will be prosecuted. The registrated trademark has been placed in our illustrations solely to protect them as part of our intellectual property.