Tie - rods M36x4
Tie-rod right - M36x4 Cat. III
| Part-no. | 656-156 |
| Weight | 3.200 kg |
| Thread | M36x4 Right thread |
| Hole | 32 |
| Length of the thread | 190 |
| Ball end width | 98 |
| Ball end height | 51 |
| Distance to center bore | 270 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Tie-rod right - M36x4 Cat. II
| Part-no. | 656-157 |
| Weight | 3.200 kg |
| Thread | M36x4 Right thread |
| Hole | 25,7 |
| Length of the thread | 190 |
| Ball end width | 98 |
| Ball end height | 51 |
| Distance to center bore | 265 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Hardened tie-rods M36x4
| Part-no. | 656-158 |
| Weight | 2.370 kg |
| Thread | M36x4 Right thread |
| Category | II |
| Hole | 25,7 |
| Length of the thread | 145 |
| Ball end width | 87 |
| Ball end height | 45 |
| Distance to center bore | 210 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Tie-rod left - M36x4 Cat. III
| Part-no. | 656-256 |
| Weight | 3.200 kg |
| Thread | M36x4 Left thread |
| Hole | 32 |
| Length of the thread | 190 |
| Ball end width | 98 |
| Ball end height | 51 |
| Distance to center bore | 270 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Tie-rod left - M36x4 Cat. II
| Part-no. | 656-257 |
| Weight | 3.200 kg |
| Thread | M36x4 Left thread |
| Hole | 25,7 |
| Length of the thread | 190 |
| Ball end width | 98 |
| Ball end height | 51 |
| Distance to center bore | 265 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Unauthorized use of any of the drawings is a violation of copyright and will be prosecuted. The registrated trademark has been placed in our illustrations solely to protect them as part of our intellectual property.