Quick change system for slurry injection
| Part-no. | 1.1485.1 |
| Weight | 6.220 kg |
| Hole | 12,5 |
| Material dimensions | 65x10 |
| Assembly clearance | 70 |
| Underbeam clearance without share | 510 |
| Total height without share | 673 |
Accessories
- 1.HH17-3152 Clamp for tine 65 x 12
- 1.HH17-3162 Clamp for tine 65 x 12
- 1.HH17-3172 Clamp for tine 65 x 12
- 101.210137.1 Share
- 101.EXT-1172 Share point - Hard metal
Holder
Share
Part fitting for machine…
| Adaptable for | Orig.part n° |
|---|---|
| Bourgault |
IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.
| Part-no. | 123079918 |
| Weight | 0.020 kg |
| Quality | 8.8 |
| Thread | M12x1,75 |
| L | 30 |
Part fitting for machine…
| Adaptable for | Orig.part n° |
|---|---|
| Bourgault |
IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.
| Part-no. | 1290812 |
| Weight | 0.092 kg |
| Quality | 12.9 |
| Thread | M12 x 1,75 |
| D | Ø24 |
| M | 10 |
| Length | 90 |
| S | 19 |
| C | 10,5 |
| V | 12 |
| Nut in DIN | 934-10 |
| X | 90° |
Part fitting for machine…
| Adaptable for | Orig.part n° |
|---|---|
| Rabe | 608D1290M |
| Vogel u. Noot | 548310 |
| Bourgault |
IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.
| Part-no. | 200-QCA-4710 |
| Weight | 0.520 kg |
| Length | 125 |
| Hole spacing | 45 |
| Hole | 13 |
| Fitting for: | I-Hof; Silo Wolf; Rabe; Väderstad; Kongskilde-Vibroflex; System David I-II-III; Doublet-Record |
| Please see: | Assembling instruction |
This set contains
- 1x 200-SLC-1001 Bushing with dust seal
- 1x 200-SLC-1010 Dust seal
- 1x 200-SLC-1020 Lock pin
- 1x 200-SLC-1035 Spring element (Plastic)
Part fitting for machine…
| Adaptable for | Orig.part n° |
|---|---|
| Kverneland | RF22679 |
| Bourgault |
| Part-no. | 410-1000 |
| Weight | 0.020 kg |
| Quality | 10.9 |
| Thread | M12x1,75 |
| Opening of the spanner | 19 |
Accessories
Part fitting for machine…
| Adaptable for | Orig.part n° |
|---|---|
| Bourgault |
IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.
The trade mark has been placed in our illustrations with the sole aim of protecting our illustrations as part of our intellectual property.
){kind=link}
© 2001-2024 Industriehof Scherenbostel Heinrich Rodenbostel GmbH. All rights reserved. Duplication only with agreement with Industriehof Scherenbostel Heinrich Rodenbostel GmbH. The Industriehof Scherenbostel Heinrich Rodenbostel GmbH is not responsible for the contents of external Internet pages.