Einböck Accessories for weeding and hoeing technology
To scroll
01.21
Cultivators shanks, sweeps for cultivators and accessories
(1327)
Spring tines, shares and accessories
(142)
Big harrow tines,, shares and clamps
(156)
Weeding and hoeing technology
(431)
Subsoiling shanks and accessories
(189)
Harrow tines, sweeps and accessories
(170)
Brake tines, shares and clamps
(85)
Quick change BOURGAULT system
(161)
Cultivator tines
(13)
Gare tines, sweeps and clamps
(32)
Clamps for harrow spring-tines
(211)
Clamps for double coil springs
(8)
Harrow teeth
(59)
Subsoilers
(12)
Quick change NICHOLS system
(35)
Straw tines
(8)
Stone collector
(3)
Bolts
(39)
Spring tines, shanks and spring
(40)
Jointer
(156)
Quick change Bourgault system
(11)
Weeder tine
(29)
Ridger, Ridger shares ,ridger bodies, ridger discs Niaux
(19)
Crop protector discs
(4)
Rotary hoe ring
(31)
Finger weeder assembly
(78)
Harrow star
(2)
Shanks with Jointer
(26)
Shanks with Jointer to fit
(24)
Angled wing share to fit
(32)
Rubber paddles for vine trunk to fit
(5)
Pitch bracket
(1)
Accessories for weeding and hoeing technology
(18)
Rive
(14)
Accessories for weeding and hoeing technology
(6)
Accessories for weeding and hoeing technology to fit
(12)
Carré Accessories for weeding and hoeing technology
(1)
Einböck Accessories for weeding and hoeing technology
(5)
Hatzenbichler
(3)
Kult Kress
(3)
Lemken
(1)
Pöttinger
(1)
Steketee
(4)
Stalk for ridger shares
| Part-no. | 1.10.1062 |
| Weight | 0.510 kg |
| Length | 255 |
| Hole | 11 |
| Material dimensions | 8x30 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Clamp 73mm
| Part-no. | 1.10.1063 |
| Weight | 0.460 kg |
| Thread | M12 |
| Material dimensions | 50x6x73 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Clamp 64mm
| Part-no. | 1.10.1064 |
| Weight | 0.440 kg |
| Thread | M12 |
| Material dimensions | 50x6x67 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding device for following tines
| Part-no. | 10.ST-HH-5 |
| Weight | 0.016 kg |
| Length | 38 |
| Type | Holding device only for 10.HS-E1 - 10.HS-E2 |
| Height | 23 |
| fit for: | 10.HS-E1 |
| Width | 30 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Wedge
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Unauthorized use of any of the drawings is a violation of copyright and will be prosecuted. The registrated trademark has been placed in our illustrations solely to protect them as part of our intellectual property.