Shares for double coil springs
To scroll
01.21
Cultivators shanks, sweeps for cultivators and accessories
(1325)
Spring tines, shares and accessories
(142)
Big harrow tines,, shares and clamps
(157)
Weeding and hoeing technology
(430)
Subsoiling shanks and accessories
(186)
Harrow tines, sweeps and accessories
(169)
Brake tines, shares and clamps
(85)
Quick change BOURGAULT system
(161)
Cultivator tines
(13)
Gare tines, sweeps and clamps
(34)
Slurry technology
(38)
Clamps for harrow spring-tines
(212)
Clamps for double coil springs
(8)
Harrow teeth
(63)
Subsoilers
(12)
Quick change NICHOLS system
(35)
Straw tines
(8)
Stone collector
(3)
Bolts
(40)
Accessories for cultivator parts to fit
(43)
Cultivator parts to fit
(1016)
Sweeps for cultivators
(245)
Cultivators shanks
(77)
Stone disengaging mechanism for cultivators tines
(18)
Double coil springs
(86)
Cultivator springiness with stone disengaging mechanism
(25)
Cultivator springiness with ridgid support
(12)
Accessories for cultivator springiness
(9)
Accessories for double coil springs
(32)
Double coil springs
(27)
Shares for double coil springs
(27)
Twisted stubble point - left model
| Part-no. | 101.10452 |
| Weight | 2.740 kg |
| Radius | 300 |
| Working width | 75 |
| Hole spacing | 45 - 75 - 120 |
| Thickness | 10 |
| Attention!! | Important infomation! |
| Notice: | Pitches right |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Twisted stubble point - left model
| Part-no. | 101.10452.1 |
| Weight | 3.150 kg |
| Radius | 300 |
| Working width | 75 |
| Hole spacing | 45-75-120 |
| Thickness | 10 |
| Attention!! | Important infomation! |
| Notice: | Pitches right |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Twisted stubble point - right model
| Part-no. | 101.10453 |
| Weight | 2.740 kg |
| Radius | 300 |
| Working width | 75 |
| Hole spacing | 45 - 75 - 120 |
| Thickness | 10 |
| Notice: | Pitches left |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Twisted stubble point - right model
| Part-no. | 101.10453.1 |
| Weight | 3.150 kg |
| Radius | 300 |
| Working width | 75 |
| Hole spacing | 45-75-120 |
| Thickness | 10 |
| Attention!! | Important infomation! |
| Notice: | Pitches left |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Twisted stubble point
| Part-no. | 101.10601 |
| Weight | 2.740 kg |
| Radius | 300 |
| Working width | 75 |
| Hole spacing | 60 |
| Thickness | 10 |
| Attention!! | Important information! |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Twisted stubble point
| Part-no. | 101.10602 |
| Weight | 2.740 kg |
| Radius | 300 |
| Working width | 75 |
| Hole spacing | 60 |
| Thickness | 10 |
| Attention!! | Important information! |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Double heart point 440mm
| Part-no. | 101.136-45 |
| Weight | 3.200 kg |
| Radius | 300 |
| Length | 440 |
| Working width | 135 |
| Hole spacing | 45 |
| Thickness | 20 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Double heart point 440mm
| Part-no. | 101.136-45-75 |
| Weight | 3.200 kg |
| Radius | 300 |
| Length | 440 |
| Working width | 135 |
| Hole spacing | 45 - 75 |
| Thickness | 20 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Double heart point 440mm
| Part-no. | 101.136-60 |
| Weight | 3.400 kg |
| Radius | 300 |
| Length | 440 |
| Working width | 135 |
| Hole spacing | 60 |
| Thickness | 20 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Double heart point 440mm
| Part-no. | 101.136-70 |
| Weight | 3.400 kg |
| Radius | 300 |
| Length | 440 |
| Working width | 135 |
| Hole spacing | 70 |
| Thickness | 20 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
External double heart point 455mm
| Part-no. | 101.137-45-75 |
| Weight | 4.350 kg |
| Radius | 300 |
| Length | 455 |
| Working width | 135 |
| Hole spacing | 45-75 |
| Thickness | 20 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Double heart point 450mm
| Part-no. | 101.180-45 |
| Weight | 3.800 kg |
| Radius | 300 |
| Length | 450 |
| Working width | 180 |
| Hole spacing | 45 |
| Thickness | 20 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Double heart point 440mm
| Part-no. | 101.180-45-75 |
| Weight | 3.800 kg |
| Radius | 300 |
| Length | 440 |
| Working width | 180 |
| Hole spacing | 45 - 75 |
| Thickness | 20 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Point SK turned left
| Part-no. | 101.260320 |
| Weight | 2.800 kg |
| Length | 450 |
| Working width | 70 |
| Hole spacing | 45 - 60 |
| Thickness | 12 |
| Attention!! | Not for for double coil springs 101.Comet-R and 101.Comet-L |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Point SK turned left, hard metal faced
| Part-no. | 101.260320-H |
| Weight | 2.946 kg |
| Length | 460 |
| Type | hard metal faced |
| Working width | 70 |
| Hole spacing | 45 - 60 |
| Thickness | 12 |
| Attention!! | Not for for double coil springs 101.Comet-R and 101.Comet-L |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Point SK turned right
| Part-no. | 101.260321 |
| Weight | 2.800 kg |
| Length | 450 |
| Working width | 70 |
| Hole spacing | 45 - 60 |
| Thickness | 12 |
| Attention!! | Not for for double coil springs 101.Comet-R and 101.Comet-L |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Point SK turned right - hard metal faced
| Part-no. | 101.260321-H |
| Weight | 2.960 kg |
| Length | 460 |
| Type | hard metal coat |
| Working width | 70 |
| Hole spacing | 45 - 60 |
| Thickness | 12 |
| Attention!! | Not for for double coil springs 101.Comet-R and 101.Comet-L |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Cultivator share 270mm
| Part-no. | 101.30.5101 |
| Weight | 1.069 kg |
| Radius | 300 |
| Length | 270 |
| Working width | 40 |
| Hole spacing | 45 |
| Bolts | M12 DIN608 |
| Thickness | 16 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stubble share 300mm
| Part-no. | 101.60239 |
| Weight | 1.200 kg |
| Working width | 300 |
| Hole spacing | 45-60 |
| Thickness | 6 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stubble share 315mm
| Part-no. | 101.60240 |
| Weight | 1.490 kg |
| Working width | 315 |
| Hole spacing | 45-55 |
| Thickness | 8 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stubble share
| Part-no. | 101.60261 |
| Weight | 1.110 kg |
| Working width | 300 |
| Hole spacing | 45-75 |
| Thickness | 6 |
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Twisted stubble point
| Part-no. | 101.60316 |
| Weight | 1.630 kg |
| Working width | 70 |
| Hole spacing | 45 - 55 |
| Thickness | 10 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Twisted stubble point
| Part-no. | 101.60317 |
| Weight | 1.630 kg |
| Working width | 70 |
| Hole spacing | 45 - 55 |
| Thickness | 10 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Twisted stubble point - left model
| Part-no. | 101.IND-1647L |
| Weight | 3.350 kg |
| Radius | 300 |
| Length | 500 |
| Working width | 75 |
| Hole spacing | 45-70 |
| Thickness | 12 |
| Hole | 13 |
| Alternatives | Show |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Twisted stubble point - left model - DURAFACE
| Part-no. | 101.IND-1647L.D |
| Weight | 3.480 kg |
| Radius | 300 |
| Length | 500 |
| Type | DURAFACE |
| Working width | 75 |
| Hole spacing | 45-70 |
| Thickness | 12 |
| Hole | 13 |
| Alternatives | Show |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Twisted stubble point - right model
| Part-no. | 101.IND-1647R |
| Weight | 3.350 kg |
| Radius | 300 |
| Length | 500 |
| Working width | 75 |
| Hole spacing | 45-70 |
| Thickness | 12 |
| Hole | 13 |
| Alternatives | Show |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Twisted stubble point - right model - DURAFACE
| Part-no. | 101.IND-1647R.D |
| Weight | 3.480 kg |
| Radius | 300 |
| Length | 500 |
| Type | DURAFACE |
| Working width | 75 |
| Hole spacing | 45-70 |
| Thickness | 12 |
| Hole | 13 |
| Alternatives | Show |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Unauthorized use of any of the drawings is a violation of copyright and will be prosecuted. The registrated trademark has been placed in our illustrations solely to protect them as part of our intellectual property.