Accessories for following tine
Holding
| Part-no. | 10.ST-HH |
| Weight | 0.080 kg |
| Thread | M10x1,5 |
| Frame | 30x30 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer
| Part-no. | 10.ST-HH-1 |
| Weight | 0.030 kg |
| Thickness | 3 |
| Hole | 10 |
| Material dimensions | 34x40 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding
| Part-no. | 10.ST-HH-12 |
| Weight | 0.140 kg |
| Thread | M12x1,75 |
| Frame | 40x40 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding
| Part-no. | 10.ST-HH-13 |
| Weight | 0.140 kg |
| Thread | M10x1,5 |
| Frame | 40x40 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding
| Part-no. | 10.ST-HH-16 |
| Weight | 0.113 kg |
| Thread | M10x1,5 |
| Frame | 50x50 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding
| Part-no. | 10.ST-HH-19 |
| Weight | 0.235 kg |
| Thread | M12x1,75 |
| Frame | 60x60 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer
| Part-no. | 10.ST-HH-2 |
| Weight | 0.020 kg |
| Thickness | 3 |
| Hole | 13 |
| Material dimensions | 34x37 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding device with self-locking nut and washer - M8
| Part-no. | 10.ST-HH-20 |
| Weight | 0.020 kg |
| Thread | M8x1,25 |
| Length | 25 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holder
| Part-no. | 10.ST-HH-22 |
| Weight | 0.136 kg |
| Thread | M12x1,75 |
| Frame | 40x40 |
| Notice | Only for following tines Ø8 and Ø9 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ledger plate
| Part-no. | 10.ST-HH-23 |
| Weight | 0.460 kg |
| fit for: | Following tines 12mm |
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer Ø30x2,5xØ10,5
| Part-no. | 10.ST-HH-24 |
| Weight | 0.018 kg |
| Thickness | 2,5 |
| Hole | 10,5 |
| Outside diameter | Ø30 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holder
| Part-no. | 10.ST-HH-25 |
| Weight | 0.238 kg |
| Thread | M14x2 |
| Frame | 50x50 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer Ø43,5x3xØ15
| Part-no. | 10.ST-HH-26 |
| Weight | 0.030 kg |
| Thickness | 3 |
| Hole | 15 |
| Outside diameter | 43,5 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Self-locking nut M14
| Part-no. | 10.ST-HH-27 |
| Weight | 0.030 kg |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ledger plate
| Part-no. | 10.ST-HH-28 |
| Weight | 0.650 kg |
| Frame | 60x60 |
| Hole spacing | 73 |
| fit for: | 10.ST-LE-09 |
| Hole | 12,5 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ledger plate
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer Ø40x3,5xØ13
| Part-no. | 10.ST-HH-3 |
| Weight | 0.030 kg |
| Thickness | 3,5 |
| Hole | 13 |
| Outside diameter | 40 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ledger plate
| Part-no. | 10.ST-HH-30 |
| Weight | 0.175 kg |
| Length | 93 |
| Frame | 50x50 |
| Hole spacing | 63 |
| Width | 40 |
| Thickness | 6 |
| Hole | 13 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ledger plate
| Part-no. | 10.ST-HH-31 |
| Weight | 0.200 kg |
| Length | 103 |
| Frame | 60x60 |
| Hole spacing | 73 |
| Width | 40 |
| Thickness | 6 |
| Hole | 13 |
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ledger plate
| Part-no. | 10.ST-HH-32 |
| Weight | 0.470 kg |
| Frame | 80x80 |
| Hole spacing | 93 |
| fit for: | 1000STD |
| Thickness | 6 |
| Hole | 13 |
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer only for 10.HS-E1
| Part-no. | 10.ST-HH-33 |
| Weight | 0.031 kg |
| fit for: | 10.HS-E1 |
| Thickness | 3 |
| Hole | 13 |
| Material dimensions | 40x44 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer only for 10.HS-E1
| Part-no. | 10.ST-HH-4 |
| Weight | 0.020 kg |
| Thickness | 3 |
| Hole | 13 |
| Material dimensions | 33x36 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding device for following tines
| Part-no. | 10.ST-HH-5 |
| Weight | 0.016 kg |
| Length | 38 |
| Type | Holding device only for 10.HS-E1 - 10.HS-E2 |
| Height | 23 |
| fit for: | 10.HS-E1 |
| Width | 30 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holder
| Part-no. | 10.ST-HH-8 |
| Weight | 0.072 kg |
| Length | 70 |
| Hole spacing | 46 |
| Width | 35 |
| Thickness | 4 |
| Hole | 11x11 |
| Fitting only for: |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding device
| Part-no. | 10.ST-HH-STD |
| Weight | 0.150 kg |
| Thickness | 3,5 |
| Hole | 13 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M10x1,5
| Part-no. | 30-101-24 |
| Weight | 0.097 kg |
| Quality | 8.8 |
| Thread | M10x1,5 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M12x1,75
| Part-no. | 30-101-25 |
| Weight | 0.164 kg |
| Quality | 8.8 |
| Thread | M12x1,75 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M12x1,75
| Part-no. | 30-101-26 |
| Weight | 0.187 kg |
| Quality | 8.8 |
| Thread | M12x1,75 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M8x1,25
| Part-no. | 30-101-28 |
| Weight | 0.010 kg |
| Thread | M8x1,25 |
| Frame | 25x25 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M10x1,5
| Part-no. | 30-101-30 |
| Weight | 0.150 kg |
| Thread | M10x1,5 |
| Related parts |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M8x1,25
| Part-no. | 30-101-32 |
| Weight | 0.020 kg |
| Thread | M8x1,25 |
| Length of the thread | 14 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M12x1,75
| Part-no. | 30-101-6 |
| Weight | 0.150 kg |
| Quality | 8.8 |
| Thread | M12x1,75 |
| H | 80 |
| A | 54 |
| L | 34 |
| G | 64 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Self-locking nut M10
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Self-locking nut M12
| Part-no. | 30-MU12-2 |
| Weight | 0.016 kg |
| Quality | 8.8 |
| Thread | M12x1,75 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Unauthorized use of any of the drawings is a violation of copyright and will be prosecuted. The registrated trademark has been placed in our illustrations solely to protect them as part of our intellectual property.