Accessories for following tine

Following tine
(254)

Accessories for following tine
(62)

Seed drill discs NIAUX 200
(86)

Accessories for Seed drill discs
(25)

Seed shares
(96)

Ceramic seed shares
(6)

Seed drilling technic - BOURGAULT system
(125)

Seed tubes to fit
(11)

Spring shanks and bearings for coulter discs Niaux
(16)

Track eradicator tines
(65)

Shares for track eradicator tines
(13)

Star-shaped trash remover
(5)

Hoop ring rollers
(6)

Pressure rollers for seed drills FARMFLEX
(6)

Mounted heavy harrows
(18)

Scrapers for seed drills
(14)

Accord Accessories for following tine
(1)

Amazone Accessories for following tine
(6)

Bednar Accessories for following tine
(1)

Einböck Accessories for following tine
(1)

Kerner Accessories for following tine
(2)

Kongskilde Accessories for following tine
(3)

Kuhn Accessories for following tine
(1)

Kverneland Accessories for following tine
(4)

Köckerling Accessories for following tine
(3)

Lemken Accessories for following tine
(3)

Pöttinger Accessories for following tine
(1)

Rabe Accessories for following tine
(2)

Sulky / Sky Agriculture Accessories for following tine
(6)

Väderstad Accessories for following tine
(16)

Accessories for following tine
(35)
Holding
Part-no. | 10.ST-HH |
Weight | 0.080 kg |
Thread | M10x1,5 |
Frame | 30x30 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer
Part-no. | 10.ST-HH-1 |
Weight | 0.030 kg |
Thickness | 3 |
Hole | 10 |
Material dimensions | 34x40 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding
Part-no. | 10.ST-HH-12 |
Weight | 0.190 kg |
Thread | M12x1,75 |
Frame | 40x40 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding
Part-no. | 10.ST-HH-13 |
Weight | 0.140 kg |
Thread | M10x1,5 |
Frame | 40x40 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding
Part-no. | 10.ST-HH-16 |
Weight | 0.113 kg |
Thread | M10x1,5 |
Frame | 50x50 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding
Part-no. | 10.ST-HH-19 |
Weight | 0.235 kg |
Thread | M12x1,75 |
Frame | 60x60 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer
Part-no. | 10.ST-HH-2 |
Weight | 0.020 kg |
Thickness | 3 |
Hole | 13 |
Material dimensions | 34x37 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding device with self-locking nut and washer - M8
Part-no. | 10.ST-HH-20 |
Weight | 0.020 kg |
Thread | M8x1,25 |
Length | 25 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holder
Part-no. | 10.ST-HH-22 |
Weight | 0.136 kg |
Thread | M12x1,75 |
Frame | 40x40 |
Notice | Only for following tines Ø8 and Ø9 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ledger plate
Part-no. | 10.ST-HH-23 |
Weight | 0.460 kg |
fit for: | Following tines 12mm |
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer Ø30x2,5xØ10,5
Part-no. | 10.ST-HH-24 |
Weight | 0.018 kg |
Thickness | 2,5 |
Hole | 10,5 |
Outside diameter | Ø30 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holder
Part-no. | 10.ST-HH-25 |
Weight | 0.238 kg |
Thread | M14x2 |
Frame | 50x50 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer Ø43,5x3xØ15
Part-no. | 10.ST-HH-26 |
Weight | 0.030 kg |
Thickness | 3 |
Hole | 15 |
Outside diameter | 43,5 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Self-locking nut M14
Part-no. | 10.ST-HH-27 |
Weight | 0.030 kg |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ledger plate
Part-no. | 10.ST-HH-28 |
Weight | 0.650 kg |
Frame | 60x60 |
Hole spacing | 73 |
fit for: | 10.ST-LE-09 |
Hole | 12,5 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ledger plate
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer Ø40x3,5xØ13
Part-no. | 10.ST-HH-3 |
Weight | 0.030 kg |
Thickness | 3,5 |
Hole | 13 |
Outside diameter | 40 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ledger plate
Part-no. | 10.ST-HH-30 |
Weight | 0.175 kg |
Length | 93 |
Frame | 50x50 |
Hole spacing | 63 |
Width | 40 |
Thickness | 6 |
Hole | 13 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ledger plate
Part-no. | 10.ST-HH-31 |
Weight | 0.200 kg |
Length | 103 |
Frame | 60x60 |
Hole spacing | 73 |
Width | 40 |
Thickness | 6 |
Hole | 13 |
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ledger plate
Part-no. | 10.ST-HH-32 |
Weight | 0.470 kg |
Frame | 80x80 |
Hole spacing | 93 |
fit for: | 1000STD |
Thickness | 6 |
Hole | 13 |
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer only for 10.HS-E1
Part-no. | 10.ST-HH-33 |
Weight | 0.031 kg |
fit for: | 10.HS-E1 |
Thickness | 3 |
Hole | 13 |
Material dimensions | 40x44 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer only for 10.HS-E1
Part-no. | 10.ST-HH-4 |
Weight | 0.020 kg |
Thickness | 3 |
Hole | 13 |
Material dimensions | 33x36 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding device for following tines
Part-no. | 10.ST-HH-5 |
Weight | 0.016 kg |
Length | 38 |
Type | Holding device only for 10.HS-E1 - 10.HS-E2 |
Height | 23 |
fit for: | 10.HS-E1 |
Width | 30 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holder
Part-no. | 10.ST-HH-8 |
Weight | 0.072 kg |
Length | 70 |
Hole spacing | 46 |
Width | 35 |
Thickness | 4 |
Hole | 11x11 |
Fitting only for: |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding device
Part-no. | 10.ST-HH-STD |
Weight | 0.150 kg |
Thickness | 3,5 |
Hole | 13 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M10x1,5
Part-no. | 30-101-24 |
Weight | 0.097 kg |
Quality | 8.8 |
Thread | M10x1,5 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M12x1,75
Part-no. | 30-101-25 |
Weight | 0.164 kg |
Quality | 8.8 |
Thread | M12x1,75 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M12x1,75
Part-no. | 30-101-26 |
Weight | 0.187 kg |
Quality | 8.8 |
Thread | M12x1,75 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M8x1,25
Part-no. | 30-101-28 |
Weight | 0.010 kg |
Thread | M8x1,25 |
Frame | 25x25 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M10x1,5
Part-no. | 30-101-29 |
Weight | 0.150 kg |
Thread | M10x1,5 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M10x1,5
Part-no. | 30-101-30 |
Weight | 0.150 kg |
Thread | M10x1,5 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M8x1,25
Part-no. | 30-101-32 |
Weight | 0.020 kg |
Thread | M8x1,25 |
Length of the thread | 14 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M12x1,75
Part-no. | 30-101-6 |
Weight | 0.150 kg |
Quality | 8.8 |
Thread | M12x1,75 |
H | 80 |
A | 54 |
L | 34 |
G | 64 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Self-locking nut M10
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Self-locking nut M12
Part-no. | 30-MU12-2 |
Weight | 0.016 kg |
Quality | 8.8 |
Thread | M12x1,75 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Unauthorized use of any of the drawings is a violation of copyright and will be prosecuted. The registrated trademark has been placed in our illustrations solely to protect them as part of our intellectual property.