Accessories for following tine
Following tine
(254)
Accessories for following tine
(62)
Seed drill discs NIAUX 200
(91)
Accessories for Seed drill discs
(29)
Seed shares
(96)
Ceramic seed shares
(6)
Seed drilling technic - BOURGAULT system
(125)
Seed tubes to fit
(11)
Spring shanks and bearings for coulter discs Niaux
(16)
Track eradicator tines
(78)
Star-shaped trash remover
(5)
Hoop ring rollers
(6)
Pressure rollers for seed drills FARMFLEX
(6)
Mounted heavy harrows
(18)
Scrapers for seed drills
(14)
Accord Accessories for following tine
(1)
Amazone Accessories for following tine
(6)
Bednar Accessories for following tine
(1)
Einböck Accessories for following tine
(1)
Kerner Accessories for following tine
(2)
Kongskilde Accessories for following tine
(3)
Kuhn Accessories for following tine
(1)
Kverneland Accessories for following tine
(4)
Köckerling Accessories for following tine
(3)
Lemken Accessories for following tine
(3)
Pöttinger Accessories for following tine
(1)
Rabe Accessories for following tine
(2)
Sulky / Sky Agriculture Accessories for following tine
(6)
Väderstad Accessories for following tine
(16)
Accessories for following tine
(35)
Holding
| Part-no. | 10.ST-HH |
| Weight | n/a |
| Thread | M10x1,5 |
| Frame | 30x30 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer
| Part-no. | 10.ST-HH-1 |
| Weight | n/a |
| Thickness | 3 |
| Hole | 10 |
| Material dimensions | 34x40 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding
| Part-no. | 10.ST-HH-12 |
| Weight | n/a |
| Thread | M12x1,75 |
| Frame | 40x40 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding
| Part-no. | 10.ST-HH-13 |
| Weight | n/a |
| Thread | M10x1,5 |
| Frame | 40x40 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding
| Part-no. | 10.ST-HH-16 |
| Weight | n/a |
| Thread | M10x1,5 |
| Frame | 50x50 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding
| Part-no. | 10.ST-HH-19 |
| Weight | n/a |
| Thread | M12x1,75 |
| Frame | 60x60 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer
| Part-no. | 10.ST-HH-2 |
| Weight | n/a |
| Thickness | 3 |
| Hole | 13 |
| Material dimensions | 34x37 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding device with self-locking nut and washer - M8
| Part-no. | 10.ST-HH-20 |
| Weight | n/a |
| Thread | M8x1,25 |
| Length | 25 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holder
| Part-no. | 10.ST-HH-22 |
| Weight | n/a |
| Thread | M12x1,75 |
| Frame | 40x40 |
| Notice | Only for following tines Ø8 and Ø9 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ledger plate
| Part-no. | 10.ST-HH-23 |
| Weight | n/a |
| fit for: | Following tines 12mm |
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer Ø30x2,5xØ10,5
| Part-no. | 10.ST-HH-24 |
| Weight | n/a |
| Thickness | 2,5 |
| Hole | 10,5 |
| Outside diameter | Ø30 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holder
| Part-no. | 10.ST-HH-25 |
| Weight | n/a |
| Thread | M14x2 |
| Frame | 50x50 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer Ø43,5x3xØ15
| Part-no. | 10.ST-HH-26 |
| Weight | n/a |
| Thickness | 3 |
| Hole | 15 |
| Outside diameter | 43,5 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Self-locking nut M14
| Part-no. | 10.ST-HH-27 |
| Weight | n/a |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ledger plate
| Part-no. | 10.ST-HH-28 |
| Weight | n/a |
| Frame | 60x60 |
| Hole spacing | 73 |
| fit for: | 10.ST-LE-09 |
| Hole | 12,5 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ledger plate
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer Ø40x3,5xØ13
| Part-no. | 10.ST-HH-3 |
| Weight | n/a |
| Thickness | 3,5 |
| Hole | 13 |
| Outside diameter | 40 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ledger plate
| Part-no. | 10.ST-HH-30 |
| Weight | n/a |
| Length | 93 |
| Frame | 50x50 |
| Hole spacing | 63 |
| Width | 40 |
| Thickness | 6 |
| Hole | 13 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ledger plate
| Part-no. | 10.ST-HH-31 |
| Weight | n/a |
| Length | 103 |
| Frame | 60x60 |
| Hole spacing | 73 |
| Width | 40 |
| Thickness | 6 |
| Hole | 13 |
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ledger plate
| Part-no. | 10.ST-HH-32 |
| Weight | n/a |
| Frame | 80x80 |
| Hole spacing | 93 |
| fit for: | 1000STD |
| Thickness | 6 |
| Hole | 13 |
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer only for 10.HS-E1
| Part-no. | 10.ST-HH-33 |
| Weight | n/a |
| fit for: | 10.HS-E1 |
| Thickness | 3 |
| Hole | 13 |
| Material dimensions | 40x44 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer only for 10.HS-E1
| Part-no. | 10.ST-HH-4 |
| Weight | n/a |
| Thickness | 3 |
| Hole | 13 |
| Material dimensions | 33x36 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding device for following tines
| Part-no. | 10.ST-HH-5 |
| Weight | n/a |
| Length | 38 |
| Type | Holding device only for 10.HS-E1 - 10.HS-E2 |
| Height | 23 |
| fit for: | 10.HS-E1 |
| Width | 30 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holder
| Part-no. | 10.ST-HH-8 |
| Weight | n/a |
| Length | 70 |
| Hole spacing | 46 |
| Width | 35 |
| Thickness | 4 |
| Hole | 11x11 |
| Fitting only for: |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding device
| Part-no. | 10.ST-HH-STD |
| Weight | n/a |
| Thickness | 3,5 |
| Hole | 13 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M10x1,5
| Part-no. | 30-101-24 |
| Weight | n/a |
| Quality | 8.8 |
| Thread | M10x1,5 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M12x1,75
| Part-no. | 30-101-25 |
| Weight | n/a |
| Quality | 8.8 |
| Thread | M12x1,75 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M12x1,75
| Part-no. | 30-101-26 |
| Weight | n/a |
| Quality | 8.8 |
| Thread | M12x1,75 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M8x1,25
| Part-no. | 30-101-28 |
| Weight | n/a |
| Thread | M8x1,25 |
| Frame | 25x25 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M10x1,5
| Part-no. | 30-101-29 |
| Weight | n/a |
| Thread | M10x1,5 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M10x1,5
| Part-no. | 30-101-30 |
| Weight | n/a |
| Thread | M10x1,5 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M8x1,25
| Part-no. | 30-101-32 |
| Weight | n/a |
| Thread | M8x1,25 |
| Length of the thread | 14 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M12x1,75
| Part-no. | 30-101-6 |
| Weight | n/a |
| Quality | 8.8 |
| Thread | M12x1,75 |
| H | 80 |
| A | 54 |
| L | 34 |
| G | 64 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Self-locking nut M10
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Self-locking nut M12
| Part-no. | 30-MU12-2 |
| Weight | n/a |
| Quality | 8.8 |
| Thread | M12x1,75 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Unauthorized use of any of the drawings is a violation of copyright and will be prosecuted. The registrated trademark has been placed in our illustrations solely to protect them as part of our intellectual property.