Accessories for following tine
Following tine
(253)
Accessories for following tine
(62)
Seed drill discs NIAUX 200
(88)
Accessories for Seed drill discs
(29)
Seed shares
(96)
Ceramic seed shares
(6)
Seed drilling technic - BOURGAULT system
(125)
Seed tubes to fit
(11)
Spring shanks and bearings for coulter discs Niaux
(16)
Track eradicator tines
(65)
Shares for track eradicator tines
(13)
Star-shaped trash remover
(5)
Hoop ring rollers
(6)
Pressure rollers for seed drills FARMFLEX
(6)
Mounted heavy harrows
(18)
Scrapers for seed drills
(14)
Accord Accessories for following tine
(1)
Amazone Accessories for following tine
(6)
Bednar Accessories for following tine
(1)
Einböck Accessories for following tine
(1)
Kerner Accessories for following tine
(2)
Kongskilde Accessories for following tine
(3)
Kuhn Accessories for following tine
(1)
Kverneland Accessories for following tine
(4)
Köckerling Accessories for following tine
(3)
Lemken Accessories for following tine
(3)
Pöttinger Accessories for following tine
(1)
Rabe Accessories for following tine
(2)
Sulky / Sky Agriculture Accessories for following tine
(6)
Väderstad Accessories for following tine
(16)
Accessories for following tine
(35)
Holding
| Part-no. | 10.ST-HH |
| Weight | 0.080 kg |
| Thread | M10x1,5 |
| Frame | 30x30 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer
| Part-no. | 10.ST-HH-1 |
| Weight | 0.030 kg |
| Thickness | 3 |
| Hole | 10 |
| Material dimensions | 34x40 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding
| Part-no. | 10.ST-HH-12 |
| Weight | 0.190 kg |
| Thread | M12x1,75 |
| Frame | 40x40 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding
| Part-no. | 10.ST-HH-13 |
| Weight | 0.140 kg |
| Thread | M10x1,5 |
| Frame | 40x40 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding
| Part-no. | 10.ST-HH-16 |
| Weight | 0.113 kg |
| Thread | M10x1,5 |
| Frame | 50x50 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding
| Part-no. | 10.ST-HH-19 |
| Weight | 0.235 kg |
| Thread | M12x1,75 |
| Frame | 60x60 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer
| Part-no. | 10.ST-HH-2 |
| Weight | 0.020 kg |
| Thickness | 3 |
| Hole | 13 |
| Material dimensions | 34x37 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding device with self-locking nut and washer - M8
| Part-no. | 10.ST-HH-20 |
| Weight | 0.020 kg |
| Thread | M8x1,25 |
| Length | 25 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holder
| Part-no. | 10.ST-HH-22 |
| Weight | 0.136 kg |
| Thread | M12x1,75 |
| Frame | 40x40 |
| Notice | Only for following tines Ø8 and Ø9 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ledger plate
| Part-no. | 10.ST-HH-23 |
| Weight | 0.460 kg |
| fit for: | Following tines 12mm |
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer Ø30x2,5xØ10,5
| Part-no. | 10.ST-HH-24 |
| Weight | 0.018 kg |
| Thickness | 2,5 |
| Hole | 10,5 |
| Outside diameter | Ø30 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holder
| Part-no. | 10.ST-HH-25 |
| Weight | 0.238 kg |
| Thread | M14x2 |
| Frame | 50x50 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer Ø43,5x3xØ15
| Part-no. | 10.ST-HH-26 |
| Weight | 0.030 kg |
| Thickness | 3 |
| Hole | 15 |
| Outside diameter | 43,5 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Self-locking nut M14
| Part-no. | 10.ST-HH-27 |
| Weight | 0.030 kg |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ledger plate
| Part-no. | 10.ST-HH-28 |
| Weight | 0.650 kg |
| Frame | 60x60 |
| Hole spacing | 73 |
| fit for: | 10.ST-LE-09 |
| Hole | 12,5 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ledger plate
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer Ø40x3,5xØ13
| Part-no. | 10.ST-HH-3 |
| Weight | 0.030 kg |
| Thickness | 3,5 |
| Hole | 13 |
| Outside diameter | 40 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ledger plate
| Part-no. | 10.ST-HH-30 |
| Weight | 0.175 kg |
| Length | 93 |
| Frame | 50x50 |
| Hole spacing | 63 |
| Width | 40 |
| Thickness | 6 |
| Hole | 13 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ledger plate
| Part-no. | 10.ST-HH-31 |
| Weight | 0.200 kg |
| Length | 103 |
| Frame | 60x60 |
| Hole spacing | 73 |
| Width | 40 |
| Thickness | 6 |
| Hole | 13 |
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ledger plate
| Part-no. | 10.ST-HH-32 |
| Weight | 0.470 kg |
| Frame | 80x80 |
| Hole spacing | 93 |
| fit for: | 1000STD |
| Thickness | 6 |
| Hole | 13 |
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer only for 10.HS-E1
| Part-no. | 10.ST-HH-33 |
| Weight | 0.031 kg |
| fit for: | 10.HS-E1 |
| Thickness | 3 |
| Hole | 13 |
| Material dimensions | 40x44 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Washer only for 10.HS-E1
| Part-no. | 10.ST-HH-4 |
| Weight | 0.020 kg |
| Thickness | 3 |
| Hole | 13 |
| Material dimensions | 33x36 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding device for following tines
| Part-no. | 10.ST-HH-5 |
| Weight | 0.016 kg |
| Length | 38 |
| Type | Holding device only for 10.HS-E1 - 10.HS-E2 |
| Height | 23 |
| fit for: | 10.HS-E1 |
| Width | 30 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holder
| Part-no. | 10.ST-HH-8 |
| Weight | 0.072 kg |
| Length | 70 |
| Hole spacing | 46 |
| Width | 35 |
| Thickness | 4 |
| Hole | 11x11 |
| Fitting only for: |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Holding device
| Part-no. | 10.ST-HH-STD |
| Weight | 0.150 kg |
| Thickness | 3,5 |
| Hole | 13 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M10x1,5
| Part-no. | 30-101-24 |
| Weight | 0.097 kg |
| Quality | 8.8 |
| Thread | M10x1,5 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M12x1,75
| Part-no. | 30-101-25 |
| Weight | 0.164 kg |
| Quality | 8.8 |
| Thread | M12x1,75 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M12x1,75
| Part-no. | 30-101-26 |
| Weight | 0.187 kg |
| Quality | 8.8 |
| Thread | M12x1,75 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M8x1,25
| Part-no. | 30-101-28 |
| Weight | 0.010 kg |
| Thread | M8x1,25 |
| Frame | 25x25 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M10x1,5
| Part-no. | 30-101-29 |
| Weight | 0.150 kg |
| Thread | M10x1,5 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M10x1,5
| Part-no. | 30-101-30 |
| Weight | 0.150 kg |
| Thread | M10x1,5 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M8x1,25
| Part-no. | 30-101-32 |
| Weight | 0.020 kg |
| Thread | M8x1,25 |
| Length of the thread | 14 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Stirrup bolt - M12x1,75
| Part-no. | 30-101-6 |
| Weight | 0.150 kg |
| Quality | 8.8 |
| Thread | M12x1,75 |
| H | 80 |
| A | 54 |
| L | 34 |
| G | 64 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Self-locking nut M10
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Self-locking nut M12
| Part-no. | 30-MU12-2 |
| Weight | 0.016 kg |
| Quality | 8.8 |
| Thread | M12x1,75 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Unauthorized use of any of the drawings is a violation of copyright and will be prosecuted. The registrated trademark has been placed in our illustrations solely to protect them as part of our intellectual property.