Amazone Following tine
Following tine - Set - Exact harrow II
| Part-no. | 10.ST-A-SET-1 |
| Weight | 5.760 kg |
| Working width | 3,00 m |
| Type | Exact harrow II |
This set contains
- 4 x 10.ST-A1Following tine Ø7mm, right
- 5 x 10.ST-A2Following tine Ø7mm, left
- 1 x 10.ST-A3Following tine Ø10mm, left
- 1 x 10.ST-A4Followimg tine Ø10mm, right
- 6 x 10.ST-A5Following tine Ø10mm, right
- 5 x 10.ST-A6Following tine Ø10mm, left
- 1 x 10.ST-AELFollowing tine Ø7mm, left
- 1 x 10.ST-AERFollowing tine Ø7mm, right
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow III S
| Part-no. | 10.ST-A-SET-10 |
| Weight | 68.440 kg |
| Working width | 8,00 m |
| Type | Exact harrow III S |
This set contains
- 22 x 10.ST-A21Following tine Ø15mm
- 23 x 10.ST-A22Following tine Ø15mm
- 8 x 10.ST-A23Following tine Ø15mm
- 2 x 10.ST-A24Followimg tine Ø15mm, right
- 11 x 10.ST-A25Following tine Ø15 mm, left
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow III S
| Part-no. | 10.ST-A-SET-11 |
| Weight | 76.800 kg |
| Working width | 9,00 m |
| Type | Exact harrow III S |
This set contains
- 22 x 10.ST-A21Following tine Ø15mm
- 23 x 10.ST-A22Following tine Ø15mm
- 12 x 10.ST-A23Following tine Ø15mm
- 2 x 10.ST-A24Followimg tine Ø15mm, right
- 15 x 10.ST-A25Following tine Ø15 mm, left
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine- Set - Exact harrow III
| Part-no. | 10.ST-A-SET-12 |
| Weight | 6.600 kg |
| Working width | 2,50 m |
| Type | Exact harrow III |
| fit for: | D9 - AD |
This set contains
- 10 x 10.ST-A10Following tine Ø9mm
- 1 x 10.ST-A17Following tine Ø9mm - outer left
- 1 x 10.ST-A18Following tine Ø9mm - outer right
- 10 x 10.ST-A19Following tine Ø9mm
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow III
| Part-no. | 10.ST-A-SET-13 |
| Weight | 9.760 kg |
| Working width | 3,00 m |
| Type | Exact harrow III |
| fit for: | D9 - MD8 - AD - ADP |
This set contains
- 12 x 10.ST-A10Following tine Ø9mm
- 1 x 10.ST-A17Following tine Ø9mm - outer left
- 1 x 10.ST-A18Following tine Ø9mm - outer right
- 12 x 10.ST-A19Following tine Ø9mm
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow III
| Part-no. | 10.ST-A-SET-14 |
| Weight | 10.280 kg |
| Working width | 4,00 m |
| Type | Exact harrow III |
| fit for: | D9 - MD8 - AD - ADP |
This set contains
- 15 x 10.ST-A10Following tine Ø9mm
- 1 x 10.ST-A16Following tine Ø9mm
- 2 x 10.ST-A17Following tine Ø9mm - outer left
- 1 x 10.ST-A18Following tine Ø9mm - outer right
- 15 x 10.ST-A19Following tine Ø9mm
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow III
| Part-no. | 10.ST-A-SET-15 |
| Weight | 10.080 kg |
| Working width | 4,00 m klappbar |
| Type | Exact harrow III |
| fit for: | Avant |
This set contains
- 15 x 10.ST-A10Following tine Ø9mm
- 1 x 10.ST-A16Following tine Ø9mm
- 2 x 10.ST-A17Following tine Ø9mm - outer left
- 1 x 10.ST-A18Following tine Ø9mm - outer right
- 15 x 10.ST-A19Following tine Ø9mm
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow III
| Part-no. | 10.ST-A-SET-16 |
| Weight | 11.440 kg |
| Working width | 4,50 m |
| Type | Exact harrow III |
| fit for: | AD - ADP |
This set contains
- 17 x 10.ST-A10Following tine Ø9mm
- 1 x 10.ST-A16Following tine Ø9mm
- 2 x 10.ST-A17Following tine Ø9mm - outer left
- 1 x 10.ST-A18Following tine Ø9mm - outer right
- 17 x 10.ST-A19Following tine Ø9mm
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow III
| Part-no. | 10.ST-A-SET-17 |
| Weight | 14.910 kg |
| Working width | 6,00 m |
| Type | Exact harrow III |
| fit for: | Xact/Avant |
This set contains
- 24 x 10.ST-A10Following tine Ø9mm
- 1 x 10.ST-A16Following tine Ø9mm
- 2 x 10.ST-A17Following tine Ø9mm - outer left
- 1 x 10.ST-A18Following tine Ø9mm - outer right
- 23 x 10.ST-A19Following tine Ø9mm
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow III S
| Part-no. | 10.ST-A-SET-18 |
| Weight | 26.820 kg |
| Working width | 3,00 m |
| Type | Exact harrow III S |
This set contains
- 12 x 10.ST-A21Following tine Ø15mm
- 12 x 10.ST-A22Following tine Ø15mm
- 1 x 10.ST-A24Followimg tine Ø15mm, right
- 1 x 10.ST-A25Following tine Ø15 mm, left
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Recouvreur FlexiDoigts III S AVANT
| Part-no. | 10.ST-A-SET-19 |
| Weight | 33.050 kg |
| Working width | 4,00 m |
| Type | Exact harrow III S AVANT |
This set contains
- 15 x 10.ST-A21Following tine Ø15mm
- 15 x 10.ST-A22Following tine Ø15mm
- 1 x 10.ST-A23Following tine Ø15mm
- 1 x 10.ST-A24Followimg tine Ø15mm, right
- 2 x 10.ST-A25Following tine Ø15 mm, left
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow II
| Part-no. | 10.ST-A-SET-2 |
| Weight | 4.870 kg |
| Working width | 2,50 m |
| Type | Exact harrow II |
This set contains
- 3 x 10.ST-A1Following tine Ø7mm, right
- 4 x 10.ST-A2Following tine Ø7mm, left
- 1 x 10.ST-A3Following tine Ø10mm, left
- 1 x 10.ST-A4Followimg tine Ø10mm, right
- 5 x 10.ST-A5Following tine Ø10mm, right
- 4 x 10.ST-A6Following tine Ø10mm, left
- 1 x 10.ST-AELFollowing tine Ø7mm, left
- 1 x 10.ST-AERFollowing tine Ø7mm, right
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Recouvreur FlexiDoigts III S AVANT
| Part-no. | 10.ST-A-SET-20 |
| Weight | 51.000 kg |
| Working width | 6,00 m |
| Type | Exact harrow III S AVANT |
This set contains
- 23 x 10.ST-A21Following tine Ø15mm
- 24 x 10.ST-A22Following tine Ø15mm
- 1 x 10.ST-A23Following tine Ø15mm
- 1 x 10.ST-A24Followimg tine Ø15mm, right
- 1 x 10.ST-A25Following tine Ø15 mm, left
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow III
| Part-no. | 10.ST-A-SET-21 |
| Weight | 8.120 kg |
| Working width | 2,50 m |
| Type | Exact harrow III |
This set contains
- 9 x 10.ST-A10Following tine Ø9mm
- 1 x 10.ST-A16Following tine Ø9mm
- 1 x 10.ST-A17Following tine Ø9mm - outer left
- 1 x 10.ST-A18Following tine Ø9mm - outer right
- 9 x 10.ST-A19Following tine Ø9mm
- 1 x 10.ST-A31Following tine Ø9mm
- 1 x 10.ST-A32Following tine Ø9mm
- 1 x 10.ST-A33Following tine Ø9mm
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow III
| Part-no. | 10.ST-A-SET-22 |
| Weight | 8.770 kg |
| Working width | 3,00 m |
| Type | Exact harrow III |
This set contains
- 10 x 10.ST-A10Following tine Ø9mm
- 1 x 10.ST-A16Following tine Ø9mm
- 1 x 10.ST-A17Following tine Ø9mm - outer left
- 1 x 10.ST-A18Following tine Ø9mm - outer right
- 10 x 10.ST-A19Following tine Ø9mm
- 1 x 10.ST-A31Following tine Ø9mm
- 1 x 10.ST-A32Following tine Ø9mm
- 1 x 10.ST-A33Following tine Ø9mm
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow III
| Part-no. | 10.ST-A-SET-23 |
| Weight | 10.070 kg |
| Working width | 3,50 m |
| Type | Exact harrow III |
This set contains
- 12 x 10.ST-A10Following tine Ø9mm
- 1 x 10.ST-A16Following tine Ø9mm
- 1 x 10.ST-A17Following tine Ø9mm - outer left
- 1 x 10.ST-A18Following tine Ø9mm - outer right
- 12 x 10.ST-A19Following tine Ø9mm
- 1 x 10.ST-A31Following tine Ø9mm
- 1 x 10.ST-A32Following tine Ø9mm
- 1 x 10.ST-A33Following tine Ø9mm
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow III
| Part-no. | 10.ST-A-SET-24 |
| Weight | 11.480 kg |
| Working width | 4,00 m |
| Type | Exact harrow III |
This set contains
- 13 x 10.ST-A10Following tine Ø9mm
- 2 x 10.ST-A16Following tine Ø9mm
- 1 x 10.ST-A17Following tine Ø9mm - outer left
- 1 x 10.ST-A18Following tine Ø9mm - outer right
- 13 x 10.ST-A19Following tine Ø9mm
- 1 x 10.ST-A31Following tine Ø9mm
- 1 x 10.ST-A32Following tine Ø9mm
- 2 x 10.ST-A33Following tine Ø9mm
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow II
| Part-no. | 10.ST-A-SET-3 |
| Weight | 7.000 kg |
| Working width | 3,33 m |
| Type | Exact harrow II |
This set contains
- 4 x 10.ST-A1Following tine Ø7mm, right
- 6 x 10.ST-A2Following tine Ø7mm, left
- 1 x 10.ST-A3Following tine Ø10mm, left
- 1 x 10.ST-A4Followimg tine Ø10mm, right
- 7 x 10.ST-A5Following tine Ø10mm, right
- 5 x 10.ST-A6Following tine Ø10mm, left
- 1 x 10.ST-AELFollowing tine Ø7mm, left
- 1 x 10.ST-AERFollowing tine Ø7mm, right
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow II
| Part-no. | 10.ST-A-SET-4 |
| Weight | 7.530 kg |
| Working width | 4,00 m |
| Type | Exact harrow II |
This set contains
- 6 x 10.ST-A1Following tine Ø7mm, right
- 7 x 10.ST-A2Following tine Ø7mm, left
- 1 x 10.ST-A3Following tine Ø10mm, left
- 1 x 10.ST-A4Followimg tine Ø10mm, right
- 8 x 10.ST-A5Following tine Ø10mm, right
- 7 x 10.ST-A6Following tine Ø10mm, left
- 1 x 10.ST-AELFollowing tine Ø7mm, left
- 1 x 10.ST-AERFollowing tine Ø7mm, right
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow II
| Part-no. | 10.ST-A-SET-5 |
| Weight | 8.850 kg |
| Working width | 4,80 m |
| Type | Exact harrow II |
This set contains
- 11 x 10.ST-A1Following tine Ø7mm, right
- 5 x 10.ST-A2Following tine Ø7mm, left
- 1 x 10.ST-A3Following tine Ø10mm, left
- 1 x 10.ST-A4Followimg tine Ø10mm, right
- 6 x 10.ST-A5Following tine Ø10mm, right
- 12 x 10.ST-A6Following tine Ø10mm, left
- 1 x 10.ST-AELFollowing tine Ø7mm, left
- 1 x 10.ST-AERFollowing tine Ø7mm, right
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow II
| Part-no. | 10.ST-A-SET-6 |
| Weight | 11.060 kg |
| Working width | 6,00 m |
| Type | Exact harrow II |
| fit for: | D8-E |
This set contains
- 4 x 10.ST-A1Following tine Ø7mm, right
- 17 x 10.ST-A2Following tine Ø7mm, left
- 1 x 10.ST-A3Following tine Ø10mm, left
- 1 x 10.ST-A4Followimg tine Ø10mm, right
- 18 x 10.ST-A5Following tine Ø10mm, right
- 5 x 10.ST-A6Following tine Ø10mm, left
- 1 x 10.ST-AELFollowing tine Ø7mm, left
- 1 x 10.ST-AERFollowing tine Ø7mm, right
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set
| Part-no. | 10.ST-A-SET-7 |
| Weight | 26.820 kg |
| Working width | 3,00 m |
| Type | Exact harrow III S |
This set contains
- 10 x 10.ST-A21Following tine Ø15mm
- 10 x 10.ST-A22Following tine Ø15mm
- 2 x 10.ST-A23Following tine Ø15mm
- 1 x 10.ST-A24Followimg tine Ø15mm, right
- 3 x 10.ST-A25Following tine Ø15 mm, left
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set
| Part-no. | 10.ST-A-SET-8 |
| Weight | 34.900 kg |
| Working width | 4,00 m |
| Type | Exact harrow III S |
This set contains
- 14 x 10.ST-A21Following tine Ø15mm
- 14 x 10.ST-A22Following tine Ø15mm
- 2 x 10.ST-A23Following tine Ø15mm
- 1 x 10.ST-A24Followimg tine Ø15mm, right
- 3 x 10.ST-A25Following tine Ø15 mm, left
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set
| Part-no. | 10.ST-A-SET-9 |
| Weight | 55.380 kg |
| Working width | 6,00 m |
| Type | Exact harrow III S |
This set contains
- 20 x 10.ST-A21Following tine Ø15mm
- 20 x 10.ST-A22Following tine Ø15mm
- 6 x 10.ST-A23Following tine Ø15mm
- 1 x 10.ST-A24Followimg tine Ø15mm, right
- 7 x 10.ST-A25Following tine Ø15 mm, left
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø7mm, right
| Part-no. | 10.ST-A1 |
| Weight | 0.150 kg |
| Length | 360 |
| Bolts opening | 10 |
| Wire diameter | Ø7 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø9mm
| Part-no. | 10.ST-A10 |
| Weight | 0.408 kg |
| Length | 580 |
| Bolts opening | 11 |
| Wire diameter | Ø9 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø7mm, left
| Part-no. | 10.ST-A13 |
| Weight | 0.182 kg |
| Length | 430 |
| Bolts opening | 9,5 |
| Wire diameter | Ø7 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø7mm, right
| Part-no. | 10.ST-A14 |
| Weight | 0.181 kg |
| Length | 430 |
| Bolts opening | 9,5 |
| Wire diameter | Ø7 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø9mm
| Part-no. | 10.ST-A16 |
| Weight | 0.350 kg |
| Length | 450 |
| Bolts opening | 10 |
| Wire diameter | Ø9 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø9mm - outer left
| Part-no. | 10.ST-A17 |
| Weight | 0.430 kg |
| Length | 620 |
| Bolts opening | 10 |
| Wire diameter | Ø9 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø9mm - outer right
| Part-no. | 10.ST-A18 |
| Weight | 0.370 kg |
| Length | 530 |
| Bolts opening | 10 |
| Wire diameter | Ø9 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø9mm
| Part-no. | 10.ST-A19 |
| Weight | 0.240 kg |
| Length | 420 |
| Bolts opening | 10 |
| Wire diameter | Ø9 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø7mm, left
| Part-no. | 10.ST-A2 |
| Weight | 0.150 kg |
| Length | 360 |
| Bolts opening | 10 |
| Wire diameter | Ø7 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø15mm
| Part-no. | 10.ST-A21 |
| Weight | 0.840 kg |
| Length | 425 |
| Bolts opening | 10 |
| Wire diameter | Ø15 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø15mm
| Part-no. | 10.ST-A22 |
| Weight | 1.180 kg |
| Length | 580 |
| Bolts opening | 10 |
| Wire diameter | Ø15 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø15mm
| Part-no. | 10.ST-A23 |
| Weight | 0.870 kg |
| Length | 450 |
| Bolts opening | 10 |
| Wire diameter | Ø15 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Followimg tine Ø15mm, right
| Part-no. | 10.ST-A24 |
| Weight | 1.220 kg |
| Length | 570 |
| Bolts opening | 15 |
| Wire diameter | Ø15 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø15 mm, left
| Part-no. | 10.ST-A25 |
| Weight | 1.220 kg |
| Length | 570 |
| Bolts opening | 15 |
| Wire diameter | Ø15 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø15mm, right
| Part-no. | 10.ST-A27 |
| Weight | 1.050 kg |
| Length | 540 |
| Bolts opening | 10 |
| Wire diameter | Ø15 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø15mm, left model
| Part-no. | 10.ST-A28 |
| Weight | 1.170 kg |
| Length | 620 |
| Bolts opening | 10 |
| Wire diameter | Ø15 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø10mm, left
| Part-no. | 10.ST-A3 |
| Weight | 0.440 kg |
| Length | 295 - 300 |
| Wire diameter | Ø10 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Roller harrow tine Ø10mm
| Part-no. | 10.ST-A30 |
| Weight | 1.470 kg |
| Length | 260 |
| Bolts opening | 14,5 |
| Wire diameter | Ø10 |
| Coil diameter internal | Ø44 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø9mm
| Part-no. | 10.ST-A31 |
| Weight | 0.410 kg |
| Length | 570 |
| Bolts opening | 10 |
| Wire diameter | Ø9 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø9mm
| Part-no. | 10.ST-A32 |
| Weight | 0.300 kg |
| Length | 425 |
| Bolts opening | 10 |
| Wire diameter | Ø9 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø9mm
| Part-no. | 10.ST-A33 |
| Weight | 0.410 kg |
| Length | 570 |
| Bolts opening | 10 |
| Wire diameter | Ø9 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø8mm
| Part-no. | 10.ST-A34 |
| Weight | 0.780 kg |
| Length | 333 |
| Wire diameter | Ø8 |
| Coil diameter internal | Ø42 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø8mm
| Part-no. | 10.ST-A35 |
| Weight | 0.760 kg |
| Length | 333 |
| Wire diameter | Ø8 |
| Coil diameter internal | Ø42 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Roller spring Ø8mm
| Part-no. | 10.ST-A36 |
| Weight | 0.800 kg |
| Length | 227 |
| Wire diameter | Ø8 |
| Coil diameter internal | Ø42 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø8mm
| Part-no. | 10.ST-A37 |
| Weight | 0.600 kg |
| Length | 333 |
| Wire diameter | Ø8 |
| Coil diameter internal | Ø42 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø12mm
| Part-no. | 10.ST-A38 |
| Weight | 1.710 kg |
| Length | 485 |
| Bolts opening | 13 |
| Wire diameter | Ø12 |
| Coil diameter internal | Ø101 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø10mm
| Part-no. | 10.ST-A39 |
| Weight | 0.480 kg |
| Length | 582 |
| Bolts opening | 11,5 |
| Wire diameter | Ø10 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Followimg tine Ø10mm, right
| Part-no. | 10.ST-A4 |
| Weight | 0.440 kg |
| Length | 295 - 300 |
| Wire diameter | Ø10 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø10mm
| Part-no. | 10.ST-A40 |
| Weight | 0.350 kg |
| Length | 429 |
| Bolts opening | 11,5 |
| Wire diameter | Ø10 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø10mm
| Part-no. | 10.ST-A41 |
| Weight | 0.380 kg |
| Length | 462 |
| Bolts opening | 11,5 |
| Wire diameter | Ø10 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø12mm
| Part-no. | 10.ST-A42 |
| Weight | 0.790 kg |
| Length | 420 |
| Bolts opening | 17 |
| Wire diameter | Ø12 |
| Machine type | Amazone AvantAmazone CatayaAmazone CentayaAmazone Cirrus |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø10mm, right
| Part-no. | 10.ST-A5 |
| Weight | 0.292 kg |
| Length | 250 - 290 |
| Wire diameter | Ø10 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø10mm, left
| Part-no. | 10.ST-A6 |
| Weight | 0.292 kg |
| Length | 250 - 290 |
| Wire diameter | Ø10 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø9mm
| Part-no. | 10.ST-A7 |
| Weight | 0.332 kg |
| Length | 510 |
| Bolts opening | 11 |
| Wire diameter | Ø9 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø6mm
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø7mm, left
| Part-no. | 10.ST-AEL |
| Weight | 0.160 kg |
| Length | 400 |
| Bolts opening | 10 |
| Wire diameter | Ø7 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø9mm, left
| Part-no. | 10.ST-AEL-9 |
| Weight | 0.350 kg |
| Length | 490 |
| Bolts opening | 10 |
| Wire diameter | Ø9 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø7mm, right
| Part-no. | 10.ST-AER |
| Weight | 0.160 kg |
| Length | 400 |
| Bolts opening | 10 |
| Wire diameter | Ø7 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø9mm, right
| Part-no. | 10.ST-AER-9 |
| Weight | 0.350 kg |
| Length | 490 |
| Bolts opening | 10 |
| Wire diameter | Ø9 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø7mm - back
| Part-no. | 10.ST-AK |
| Weight | 0.300 kg |
| Length | 290 |
| Wire diameter | Ø7 |
| Coil diameter internal | Ø48 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø7mm - front
| Part-no. | 10.ST-AL |
| Weight | 0.370 kg |
| Length | 360 |
| Wire diameter | Ø7 |
| Coil diameter internal | Ø49 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø12mm
| Part-no. | 1000STE |
| Weight | 0.930 kg |
| Length | 480 |
| Bolts opening | 14 |
| Wire diameter | Ø12 |
| Coil diameter internal | Ø101 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø12mm
| Part-no. | 1000STE.1 |
| Weight | 0.930 kg |
| Length | 480 |
| Bolts opening | 14 |
| Wire diameter | Ø12 |
| Coil diameter internal | Ø101 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Unauthorized use of any of the drawings is a violation of copyright and will be prosecuted. The registrated trademark has been placed in our illustrations solely to protect them as part of our intellectual property.