Amazone Following tine
Following tine
Accessories for following tine
Seed drill discs NIAUX 200
Accessories for Seed drill discs
Seed shares
Ceramic seed shares
Seed drilling technic - BOURGAULT system
Seed tubes to fit
Spring shanks and bearings for coulter discs Niaux
Track eradicator tines
Shares for track eradicator tines
Star-shaped trash remover
Hoop ring rollers
Pressure rollers for seed drills FARMFLEX
Mounted heavy harrows
Scrapers for seed drills
Accord Following tine
Agro-Soyus Following tine
Amazone Following tine
BBG Following tine
Bednar Following tine
Bourgault Following tine
Brix Following tine
Degelmann Following tine
Doublet-Record Following tine
Eberhardt Following tine
Einböck Following tine
Evers Agro Following tine
Farmet Following tine
Ferrag Following tine
Fiona Following tine
Fischer Following tine
Fraudge Following tine
Great Plains Following tine
Grégoire Besson Following tine
Gruse Following tine
Güttler Following tine
Hassia Following tine
Hatzenbichler Following tine
Heger Following tine
Jean de Bru Following tine
John Deere Following tine
Kerner Following tine
Kongskilde Following tine
KRM Following tine
Kubota Following tine
Kuhn Following tine
Kverneland Following tine
Kvik Up Following tine
Köckerling Following tine
Lely Following tine
Lemken Following tin
Marsk-Stig Following tine
Maschio / Gaspardo Following tine
Massey Ferguson Following tine
Moreau Following tine
Nodet Following tine
Nordsten Following tine
Pöttinger Following tine
Rabe Following tine
Ralle Following tine
Rampelmann Following tine
Reekie Following tine
Reformwerke Following tine
Regent Following tine
Saxonia Following tine
Schliesing Following tine
Schmotzer Following tine
Simba Following tine
Standard following tines
Stegsted Following tine
Steketee Following tine
Straw tines
Strom Following tine
Sulky / Sky Agriculture Following tine
Taarup Following tine
Thyregod Following tine
Tulip Following tine
Tume Following tine
Universal Following tine
Vicon Following tine
Vieberg Following tine
Vogel u. Noot Following tine
Väderstad Following tine
Following tine - Set - Exact harrow II
| Part-no. | 10.ST-A-SET-1 |
| Weight | 5.760 kg |
| Working width | 3,00 m |
| Type | Exact harrow II |
This set contains
- 4 x 10.ST-A1Following tine Ø7mm, right
- 5 x 10.ST-A2Following tine Ø7mm, left
- 1 x 10.ST-A3Following tine Ø10mm, left
- 1 x 10.ST-A4Followimg tine Ø10mm, right
- 6 x 10.ST-A5Following tine Ø10mm, right
- 5 x 10.ST-A6Following tine Ø10mm, left
- 1 x 10.ST-AELFollowing tine Ø7mm, left
- 1 x 10.ST-AERFollowing tine Ø7mm, right
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow III S
| Part-no. | 10.ST-A-SET-10 |
| Weight | 68.440 kg |
| Working width | 8,00 m |
| Type | Exact harrow III S |
This set contains
- 22 x 10.ST-A21Following tine Ø15mm
- 23 x 10.ST-A22Following tine Ø15mm
- 8 x 10.ST-A23Following tine Ø15mm
- 2 x 10.ST-A24Followimg tine Ø15mm, right
- 11 x 10.ST-A25Following tine Ø15 mm, left
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow III S
| Part-no. | 10.ST-A-SET-11 |
| Weight | 76.800 kg |
| Working width | 9,00 m |
| Type | Exact harrow III S |
This set contains
- 22 x 10.ST-A21Following tine Ø15mm
- 23 x 10.ST-A22Following tine Ø15mm
- 12 x 10.ST-A23Following tine Ø15mm
- 2 x 10.ST-A24Followimg tine Ø15mm, right
- 15 x 10.ST-A25Following tine Ø15 mm, left
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine- Set - Exact harrow III
| Part-no. | 10.ST-A-SET-12 |
| Weight | 6.600 kg |
| Working width | 2,50 m |
| Type | Exact harrow III |
| fit for: | D9 - AD |
This set contains
- 10 x 10.ST-A10Following tine Ø9mm
- 1 x 10.ST-A17Following tine Ø9mm - outer left
- 1 x 10.ST-A18Following tine Ø9mm - outer right
- 10 x 10.ST-A19Following tine Ø9mm
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow III
| Part-no. | 10.ST-A-SET-13 |
| Weight | 9.760 kg |
| Working width | 3,00 m |
| Type | Exact harrow III |
| fit for: | D9 - MD8 - AD - ADP |
This set contains
- 12 x 10.ST-A10Following tine Ø9mm
- 1 x 10.ST-A17Following tine Ø9mm - outer left
- 1 x 10.ST-A18Following tine Ø9mm - outer right
- 12 x 10.ST-A19Following tine Ø9mm
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow III
| Part-no. | 10.ST-A-SET-14 |
| Weight | 10.280 kg |
| Working width | 4,00 m |
| Type | Exact harrow III |
| fit for: | D9 - MD8 - AD - ADP |
This set contains
- 15 x 10.ST-A10Following tine Ø9mm
- 1 x 10.ST-A16Following tine Ø9mm
- 2 x 10.ST-A17Following tine Ø9mm - outer left
- 1 x 10.ST-A18Following tine Ø9mm - outer right
- 15 x 10.ST-A19Following tine Ø9mm
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow III
| Part-no. | 10.ST-A-SET-15 |
| Weight | 10.080 kg |
| Working width | 4,00 m klappbar |
| Type | Exact harrow III |
| fit for: | Avant |
This set contains
- 15 x 10.ST-A10Following tine Ø9mm
- 1 x 10.ST-A16Following tine Ø9mm
- 2 x 10.ST-A17Following tine Ø9mm - outer left
- 1 x 10.ST-A18Following tine Ø9mm - outer right
- 15 x 10.ST-A19Following tine Ø9mm
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow III
| Part-no. | 10.ST-A-SET-16 |
| Weight | 11.440 kg |
| Working width | 4,50 m |
| Type | Exact harrow III |
| fit for: | AD - ADP |
This set contains
- 17 x 10.ST-A10Following tine Ø9mm
- 1 x 10.ST-A16Following tine Ø9mm
- 2 x 10.ST-A17Following tine Ø9mm - outer left
- 1 x 10.ST-A18Following tine Ø9mm - outer right
- 17 x 10.ST-A19Following tine Ø9mm
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow III
| Part-no. | 10.ST-A-SET-17 |
| Weight | 14.910 kg |
| Working width | 6,00 m |
| Type | Exact harrow III |
| fit for: | Xact/Avant |
This set contains
- 23 x 10.ST-A10Following tine Ø9mm
- 1 x 10.ST-A16Following tine Ø9mm
- 2 x 10.ST-A17Following tine Ø9mm - outer left
- 1 x 10.ST-A18Following tine Ø9mm - outer right
- 22 x 10.ST-A19Following tine Ø9mm
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow III S
| Part-no. | 10.ST-A-SET-18 |
| Weight | 26.820 kg |
| Working width | 3,00 m |
| Type | Exact harrow III S |
This set contains
- 12 x 10.ST-A21Following tine Ø15mm
- 12 x 10.ST-A22Following tine Ø15mm
- 1 x 10.ST-A24Followimg tine Ø15mm, right
- 1 x 10.ST-A25Following tine Ø15 mm, left
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Recouvreur FlexiDoigts III S AVANT
| Part-no. | 10.ST-A-SET-19 |
| Weight | 33.050 kg |
| Working width | 4,00 m |
| Type | Exact harrow III S AVANT |
This set contains
- 15 x 10.ST-A21Following tine Ø15mm
- 15 x 10.ST-A22Following tine Ø15mm
- 1 x 10.ST-A23Following tine Ø15mm
- 1 x 10.ST-A24Followimg tine Ø15mm, right
- 2 x 10.ST-A25Following tine Ø15 mm, left
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow II
| Part-no. | 10.ST-A-SET-2 |
| Weight | 4.870 kg |
| Working width | 2,50 m |
| Type | Exact harrow II |
This set contains
- 3 x 10.ST-A1Following tine Ø7mm, right
- 4 x 10.ST-A2Following tine Ø7mm, left
- 1 x 10.ST-A3Following tine Ø10mm, left
- 1 x 10.ST-A4Followimg tine Ø10mm, right
- 5 x 10.ST-A5Following tine Ø10mm, right
- 4 x 10.ST-A6Following tine Ø10mm, left
- 1 x 10.ST-AELFollowing tine Ø7mm, left
- 1 x 10.ST-AERFollowing tine Ø7mm, right
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Recouvreur FlexiDoigts III S AVANT
| Part-no. | 10.ST-A-SET-20 |
| Weight | 51.000 kg |
| Working width | 6,00 m |
| Type | Exact harrow III S AVANT |
This set contains
- 23 x 10.ST-A21Following tine Ø15mm
- 24 x 10.ST-A22Following tine Ø15mm
- 1 x 10.ST-A23Following tine Ø15mm
- 1 x 10.ST-A24Followimg tine Ø15mm, right
- 1 x 10.ST-A25Following tine Ø15 mm, left
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow III
| Part-no. | 10.ST-A-SET-21 |
| Weight | 8.120 kg |
| Working width | 2,50 m |
| Type | Exact harrow III |
This set contains
- 9 x 10.ST-A10Following tine Ø9mm
- 1 x 10.ST-A16Following tine Ø9mm
- 1 x 10.ST-A17Following tine Ø9mm - outer left
- 1 x 10.ST-A18Following tine Ø9mm - outer right
- 9 x 10.ST-A19Following tine Ø9mm
- 1 x 10.ST-A31Following tine Ø9mm
- 1 x 10.ST-A32Following tine Ø9mm
- 1 x 10.ST-A33Following tine Ø9mm
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow III
| Part-no. | 10.ST-A-SET-22 |
| Weight | 8.770 kg |
| Working width | 3,00 m |
| Type | Exact harrow III |
This set contains
- 10 x 10.ST-A10Following tine Ø9mm
- 1 x 10.ST-A16Following tine Ø9mm
- 1 x 10.ST-A17Following tine Ø9mm - outer left
- 1 x 10.ST-A18Following tine Ø9mm - outer right
- 10 x 10.ST-A19Following tine Ø9mm
- 1 x 10.ST-A31Following tine Ø9mm
- 1 x 10.ST-A32Following tine Ø9mm
- 1 x 10.ST-A33Following tine Ø9mm
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow III
| Part-no. | 10.ST-A-SET-23 |
| Weight | 10.070 kg |
| Working width | 3,50 m |
| Type | Exact harrow III |
This set contains
- 12 x 10.ST-A10Following tine Ø9mm
- 1 x 10.ST-A16Following tine Ø9mm
- 1 x 10.ST-A17Following tine Ø9mm - outer left
- 1 x 10.ST-A18Following tine Ø9mm - outer right
- 12 x 10.ST-A19Following tine Ø9mm
- 1 x 10.ST-A31Following tine Ø9mm
- 1 x 10.ST-A32Following tine Ø9mm
- 1 x 10.ST-A33Following tine Ø9mm
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow III
| Part-no. | 10.ST-A-SET-24 |
| Weight | 11.480 kg |
| Working width | 4,00 m |
| Type | Exact harrow III |
This set contains
- 13 x 10.ST-A10Following tine Ø9mm
- 2 x 10.ST-A16Following tine Ø9mm
- 1 x 10.ST-A17Following tine Ø9mm - outer left
- 1 x 10.ST-A18Following tine Ø9mm - outer right
- 13 x 10.ST-A19Following tine Ø9mm
- 1 x 10.ST-A31Following tine Ø9mm
- 1 x 10.ST-A32Following tine Ø9mm
- 2 x 10.ST-A33Following tine Ø9mm
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow II
| Part-no. | 10.ST-A-SET-3 |
| Weight | 7.000 kg |
| Working width | 3,33 m |
| Type | Exact harrow II |
This set contains
- 4 x 10.ST-A1Following tine Ø7mm, right
- 6 x 10.ST-A2Following tine Ø7mm, left
- 1 x 10.ST-A3Following tine Ø10mm, left
- 1 x 10.ST-A4Followimg tine Ø10mm, right
- 7 x 10.ST-A5Following tine Ø10mm, right
- 5 x 10.ST-A6Following tine Ø10mm, left
- 1 x 10.ST-AELFollowing tine Ø7mm, left
- 1 x 10.ST-AERFollowing tine Ø7mm, right
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow II
| Part-no. | 10.ST-A-SET-4 |
| Weight | 7.530 kg |
| Working width | 4,00 m |
| Type | Exact harrow II |
This set contains
- 6 x 10.ST-A1Following tine Ø7mm, right
- 7 x 10.ST-A2Following tine Ø7mm, left
- 1 x 10.ST-A3Following tine Ø10mm, left
- 1 x 10.ST-A4Followimg tine Ø10mm, right
- 8 x 10.ST-A5Following tine Ø10mm, right
- 7 x 10.ST-A6Following tine Ø10mm, left
- 1 x 10.ST-AELFollowing tine Ø7mm, left
- 1 x 10.ST-AERFollowing tine Ø7mm, right
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow II
| Part-no. | 10.ST-A-SET-5 |
| Weight | 8.850 kg |
| Working width | 4,80 m |
| Type | Exact harrow II |
This set contains
- 11 x 10.ST-A1Following tine Ø7mm, right
- 5 x 10.ST-A2Following tine Ø7mm, left
- 1 x 10.ST-A3Following tine Ø10mm, left
- 1 x 10.ST-A4Followimg tine Ø10mm, right
- 6 x 10.ST-A5Following tine Ø10mm, right
- 12 x 10.ST-A6Following tine Ø10mm, left
- 1 x 10.ST-AELFollowing tine Ø7mm, left
- 1 x 10.ST-AERFollowing tine Ø7mm, right
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set - Exact harrow II
| Part-no. | 10.ST-A-SET-6 |
| Weight | 11.060 kg |
| Working width | 6,00 m |
| Type | Exact harrow II |
| fit for: | D8-E |
This set contains
- 4 x 10.ST-A1Following tine Ø7mm, right
- 17 x 10.ST-A2Following tine Ø7mm, left
- 1 x 10.ST-A3Following tine Ø10mm, left
- 1 x 10.ST-A4Followimg tine Ø10mm, right
- 18 x 10.ST-A5Following tine Ø10mm, right
- 5 x 10.ST-A6Following tine Ø10mm, left
- 1 x 10.ST-AELFollowing tine Ø7mm, left
- 1 x 10.ST-AERFollowing tine Ø7mm, right
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set
| Part-no. | 10.ST-A-SET-7 |
| Weight | 26.820 kg |
| Working width | 3,00 m |
| Type | Exact harrow III S |
This set contains
- 10 x 10.ST-A21Following tine Ø15mm
- 10 x 10.ST-A22Following tine Ø15mm
- 2 x 10.ST-A23Following tine Ø15mm
- 1 x 10.ST-A24Followimg tine Ø15mm, right
- 3 x 10.ST-A25Following tine Ø15 mm, left
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set
| Part-no. | 10.ST-A-SET-8 |
| Weight | 34.900 kg |
| Working width | 4,00 m |
| Type | Exact harrow III S |
This set contains
- 14 x 10.ST-A21Following tine Ø15mm
- 14 x 10.ST-A22Following tine Ø15mm
- 2 x 10.ST-A23Following tine Ø15mm
- 1 x 10.ST-A24Followimg tine Ø15mm, right
- 3 x 10.ST-A25Following tine Ø15 mm, left
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine - Set
| Part-no. | 10.ST-A-SET-9 |
| Weight | 55.380 kg |
| Working width | 6,00 m |
| Type | Exact harrow III S |
This set contains
- 20 x 10.ST-A21Following tine Ø15mm
- 20 x 10.ST-A22Following tine Ø15mm
- 6 x 10.ST-A23Following tine Ø15mm
- 1 x 10.ST-A24Followimg tine Ø15mm, right
- 7 x 10.ST-A25Following tine Ø15 mm, left
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø7mm, right
| Part-no. | 10.ST-A1 |
| Weight | 0.150 kg |
| Length | 360 |
| Bolts opening | 10 |
| Wire diameter | Ø7 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø9mm
| Part-no. | 10.ST-A10 |
| Weight | 0.408 kg |
| Length | 580 |
| Bolts opening | 11 |
| Wire diameter | Ø9 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø7mm, left
| Part-no. | 10.ST-A13 |
| Weight | 0.182 kg |
| Length | 430 |
| Bolts opening | 9,5 |
| Wire diameter | Ø7 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø7mm, right
| Part-no. | 10.ST-A14 |
| Weight | 0.181 kg |
| Length | 430 |
| Bolts opening | 9,5 |
| Wire diameter | Ø7 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø9mm
| Part-no. | 10.ST-A16 |
| Weight | 0.350 kg |
| Length | 450 |
| Bolts opening | 10 |
| Wire diameter | Ø9 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø9mm - outer left
| Part-no. | 10.ST-A17 |
| Weight | 0.430 kg |
| Length | 620 |
| Bolts opening | 10 |
| Wire diameter | Ø9 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø9mm - outer right
| Part-no. | 10.ST-A18 |
| Weight | 0.370 kg |
| Length | 530 |
| Bolts opening | 10 |
| Wire diameter | Ø9 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø9mm
| Part-no. | 10.ST-A19 |
| Weight | 0.240 kg |
| Length | 420 |
| Bolts opening | 10 |
| Wire diameter | Ø9 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø7mm, left
| Part-no. | 10.ST-A2 |
| Weight | 0.150 kg |
| Length | 360 |
| Bolts opening | 10 |
| Wire diameter | Ø7 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø15mm
| Part-no. | 10.ST-A21 |
| Weight | 0.840 kg |
| Length | 425 |
| Bolts opening | 10 |
| Wire diameter | Ø15 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø15mm
| Part-no. | 10.ST-A22 |
| Weight | 1.180 kg |
| Length | 580 |
| Bolts opening | 10 |
| Wire diameter | Ø15 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø15mm
| Part-no. | 10.ST-A23 |
| Weight | 0.870 kg |
| Length | 450 |
| Bolts opening | 10 |
| Wire diameter | Ø15 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Followimg tine Ø15mm, right
| Part-no. | 10.ST-A24 |
| Weight | 1.220 kg |
| Length | 570 |
| Bolts opening | 15 |
| Wire diameter | Ø15 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø15 mm, left
| Part-no. | 10.ST-A25 |
| Weight | 1.220 kg |
| Length | 570 |
| Bolts opening | 15 |
| Wire diameter | Ø15 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø15mm, right
| Part-no. | 10.ST-A27 |
| Weight | 1.050 kg |
| Length | 540 |
| Bolts opening | 10 |
| Wire diameter | Ø15 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø15mm, left model
| Part-no. | 10.ST-A28 |
| Weight | 1.170 kg |
| Length | 620 |
| Bolts opening | 10 |
| Wire diameter | Ø15 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø10mm, left
| Part-no. | 10.ST-A3 |
| Weight | 0.440 kg |
| Length | 295 - 300 |
| Wire diameter | Ø10 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Roller harrow tine Ø10mm
| Part-no. | 10.ST-A30 |
| Weight | 1.470 kg |
| Length | 260 |
| Bolts opening | 14,5 |
| Wire diameter | Ø10 |
| Coil diameter internal | Ø44 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø9mm
| Part-no. | 10.ST-A31 |
| Weight | 0.410 kg |
| Length | 570 |
| Bolts opening | 10 |
| Wire diameter | Ø9 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø9mm
| Part-no. | 10.ST-A32 |
| Weight | 0.300 kg |
| Length | 425 |
| Bolts opening | 10 |
| Wire diameter | Ø9 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø9mm
| Part-no. | 10.ST-A33 |
| Weight | 0.410 kg |
| Length | 570 |
| Bolts opening | 10 |
| Wire diameter | Ø9 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø8mm
| Part-no. | 10.ST-A34 |
| Weight | 0.780 kg |
| Length | 333 |
| Wire diameter | Ø8 |
| Coil diameter internal | Ø42 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø8mm
| Part-no. | 10.ST-A35 |
| Weight | 0.760 kg |
| Length | 333 |
| Wire diameter | Ø8 |
| Coil diameter internal | Ø42 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Roller spring Ø8mm
| Part-no. | 10.ST-A36 |
| Weight | 0.800 kg |
| Length | 227 |
| Wire diameter | Ø8 |
| Coil diameter internal | Ø42 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø8mm
| Part-no. | 10.ST-A37 |
| Weight | 0.600 kg |
| Length | 333 |
| Wire diameter | Ø8 |
| Coil diameter internal | Ø42 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Followimg tine Ø10mm, right
| Part-no. | 10.ST-A4 |
| Weight | 0.440 kg |
| Length | 295 - 300 |
| Wire diameter | Ø10 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø10mm, right
| Part-no. | 10.ST-A5 |
| Weight | 0.292 kg |
| Length | 250 - 290 |
| Wire diameter | Ø10 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø10mm, left
| Part-no. | 10.ST-A6 |
| Weight | 0.292 kg |
| Length | 250 - 290 |
| Wire diameter | Ø10 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø9mm
| Part-no. | 10.ST-A7 |
| Weight | 0.332 kg |
| Length | 510 |
| Bolts opening | 11 |
| Wire diameter | Ø9 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø6mm
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø7mm, left
| Part-no. | 10.ST-AEL |
| Weight | 0.160 kg |
| Length | 400 |
| Bolts opening | 10 |
| Wire diameter | Ø7 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø9mm, left
| Part-no. | 10.ST-AEL-9 |
| Weight | 0.350 kg |
| Length | 490 |
| Bolts opening | 10 |
| Wire diameter | Ø9 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø7mm, right
| Part-no. | 10.ST-AER |
| Weight | 0.160 kg |
| Length | 400 |
| Bolts opening | 10 |
| Wire diameter | Ø7 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø9mm, right
| Part-no. | 10.ST-AER-9 |
| Weight | 0.350 kg |
| Length | 490 |
| Bolts opening | 10 |
| Wire diameter | Ø9 |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø7mm - back
| Part-no. | 10.ST-AK |
| Weight | 0.300 kg |
| Length | 290 |
| Wire diameter | Ø7 |
| Coil diameter internal | Ø48 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø7mm - front
| Part-no. | 10.ST-AL |
| Weight | 0.370 kg |
| Length | 360 |
| Wire diameter | Ø7 |
| Coil diameter internal | Ø49 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Unauthorized use of any of the drawings is a violation of copyright and will be prosecuted. The registrated trademark has been placed in our illustrations solely to protect them as part of our intellectual property.