Marsk-Stig Following tine
Following tine Ø10mm
| Part-no. | 10.ST-MS-2 |
| Weight | 0.710 kg |
| Length | 540 |
| Bolts opening | 11 |
| Wire diameter | Ø10 |
| Coil diameter internal | Ø75 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø10mm
| Part-no. | 10.ST-MS-3 |
| Weight | 0.650 kg |
| Length | 500 |
| Bolts opening | 13 |
| Wire diameter | Ø10 |
| Coil diameter internal | Ø75 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø12mm
| Part-no. | 10.ST-MS-4 |
| Weight | 1.210 kg |
| Length | 600 |
| Bolts opening | 13 |
| Wire diameter | Ø12 |
| Coil diameter internal | Ø85 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Following tine Ø10mm
| Part-no. | 10.ST-MS1 |
| Weight | 0.700 kg |
| Length | 490 |
| Bolts opening | 12 |
| Wire diameter | Ø10 |
| Coil diameter internal | Ø99 |
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Unauthorized use of any of the drawings is a violation of copyright and will be prosecuted. The registrated trademark has been placed in our illustrations solely to protect them as part of our intellectual property.