Kverneland Bearings for coulters
Bearing without cap piece of the bearing with shaft Ø34mm
FavoritesCompare
print
| Part-no. | 31-L17 |
| Weight | 2.090 kg |
| Pitch circle diameter | Ø80 |
| Attention!! | The bearing is delivered without grease lubrication! |
| Important notice: | |
| Important notice 1 | The hub 31-L17 is a hub designed plow coulters. As such, it is not designed to absorb lateral forces, and is suited only for straight directions of drive. |
| Important notice 2 | The hub 31-L17 contains a needle bearing which is supported, closed and sealed on both sides by the housing and the hub cap. For this reason, a maximum of only one dose of grease may be applied into the hub. Otherwise, damage may occur in the hub. |
Part fitting for machine…
Adaptable for
Orig.part n°
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Bearing without cap piece of the bearing with shaft Ø30mm
FavoritesCompare
print
| Part-no. | 31-L17A |
| Weight | 1.920 kg |
| Pitch circle diameter | Ø80 |
| Attention!! | The bearing is delivered without grease lubrication! |
Part fitting for machine…
Adaptable for
Orig.part n°
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Unauthorized use of any of the drawings is a violation of copyright and will be prosecuted. The registrated trademark has been placed in our illustrations solely to protect them as part of our intellectual property.