Ball and bushes
Top-links and accessories
(672)
Top-hooks
(55)
Hydraulic top-links and accessories
(111)
Ball and bushes
(43)
Whoa-Stop
(20)
Quick coupler
(21)
Automatic hooks for lower links and accessories
(95)
Hooks for front power lift
(7)
Ball joint terminals
(79)
Top- an lower- link pins
(120)
Cross bars
(8)
Adjustable levelling assembly
(8)
stabilizer chains
(11)
Turnbuckles
(9)
Trailing security pins
(5)
Trailer coupling rings
(30)
Parking jacks
(4)
Washlockers
(18)
Triangular coupling device
(26)
Cone without ball Cat. II for lower hooks
| Part-no. | 652-A115 |
| Weight | n/a |
| Category | II |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Reduction cone Cat. II-I for lower hooks
| Part-no. | 652-A16 |
| Weight | n/a |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for lower link hooks - Cat. III-II - BLACK LINE
| Part-no. | 652-C602.1 |
| Weight | n/a |
| Category | III-II |
| Width | 45 |
| Hole | 28,5 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 64 |
| Alternatives | Show |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for lower link hooks - Cat. III-II
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for lower link hooks - Cat. III - BLACK LINE
| Part-no. | 652-C603.1 |
| Weight | n/a |
| Category | III |
| Width | 45 |
| Hole | 51 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 85 |
| Alternatives | Show |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for lower link hook Cat. III
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball guide cone Cat.III-II with linch pin
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball guide cone Cat. III-II with linch pin - BLACK LINE
| Part-no. | 652-C621.1 |
| Weight | n/a |
| Category | II-III |
| Hole | 28,4 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 64 |
| Alternatives | Show |
This set contains
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Cone without ball Cat. III for lower hooks
| Part-no. | 652-C635 |
| Weight | n/a |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat. III-II
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat. III-II - BLACK LINE
| Part-no. | 652-C652.1 |
| Weight | n/a |
| Category | III-II |
| Width | 51 |
| Hole | 25,5 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 60 |
| Alternatives | Show |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat. III
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat. III - BLACK LINE
| Part-no. | 652-C656.1 |
| Weight | n/a |
| Category | III |
| Width | 51 |
| Hole | 32,5 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 60 |
| Alternatives | Show |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball guide cone with linch pin Cat. III
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball guide cone Cat.III with linch pin - BLACK LINE
| Part-no. | 652-C661.1 |
| Weight | n/a |
| Category | III |
| Hole | 37 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 64 |
| Alternatives | Show |
This set contains
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for lower link hooks - Cat. II - BLACK LINE
| Part-no. | 652-D702.1 |
| Weight | n/a |
| Category | II |
| Width | 45 |
| Hole | 28,8 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 56 |
| Alternatives | Show |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for lower link hook - Cat. II
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for lower links hooks - Cat. II-I
| Part-no. | 652-D703A |
| Weight | n/a |
| Category | II-I |
| Width | 45 |
| Hole | 22,1 |
| Outside diameter | 56 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball guide cone with linch pin Cat. II
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball guide cone Cat.II with linch pin - BLACK LINE
| Part-no. | 652-D721.1 |
| Weight | n/a |
| Category | II |
| Hole | 28,4 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 56 |
| Alternatives | Show |
This set contains
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat.II
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat. II - BLACK LINE
| Part-no. | 652-D752.1 |
| Weight | n/a |
| Category | II |
| Width | 51 |
| Hole | 25,8 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 50 |
| Alternatives | Show |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball guide cone with linch pin Cat. II/l
| Part-no. | 652-D956 |
| Weight | n/a |
| Category | II-I |
| Hole | 22,5 |
| Outside diameter | 56 |
This set contains
Accessories
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat.I
| Part-no. | 652-E006 |
| Weight | n/a |
| Category | I |
| Width | 44 |
| Hole | 19,1 |
| Outside diameter | 38 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball guide cone with linch pin Cat. I
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for lower links hooks - Cat. IV-III
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for lower links hooks - Cat. IV-III - BLACK LINE
| Part-no. | 652-F602.1 |
| Weight | n/a |
| Category | III-IV |
| Width | 57 |
| Hole | 37 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 85 |
| Alternatives | Show |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for lower links hooks - Cat. IV
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for lower links hooks - Cat. IV - BLACK LINE
| Part-no. | 652-F603.1 |
| Weight | n/a |
| Category | IV |
| Width | 57 |
| Hole | 51 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 85 |
| Alternatives | Show |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat.IV-III
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat. III-IV - BLACK LINE
| Part-no. | 652-R32-4.1 |
| Weight | n/a |
| Category | IV-III |
| Width | 63 |
| Hole | 32 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 78 |
| Alternatives | Show |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat.IV
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat. IV - BLACK LINE
| Part-no. | 652-R45-4.1 |
| Weight | n/a |
| Category | IV |
| Width | 63 |
| Hole | 45,5 |
| Important notice: | The Black Line parts yield a longer resistance according to the salt-spray-test (SST-life). Red rust in SST occurs at 600 hrs Core hardness values remain at 0.70 1,00 mm |
| Outside diameter | 77,5 |
| Alternatives | Show |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for lower link hook Cat. III HD
| Part-no. | 652-RI37 |
| Weight | n/a |
| Category | III |
| Width | 45 |
| Hole | 37 |
| Please see: | Information |
| Outside diameter | 64 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for top hooks Cat. III HD
| Part-no. | 652-RS32 |
| Weight | n/a |
| Category | III |
| Width | 51 |
| Hole | 32 |
| Please see: | Information |
| Outside diameter | 60 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Ball for lower links hooks - Cat. II-I
| Part-no. | 652-U21 |
| Weight | n/a |
| Category | II-I |
| Width | 35 |
| Hole | 22,5 |
| Notice: | General informations |
| Outside diameter | 56 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Reduction bush for top hook balls Cat.II-I
| Part-no. | 658-19 |
| Weight | n/a |
| Length | 50 |
| Category | II-I |
| Hole | 19,4 |
| Outside diameter | 25 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Reduction bush for top hook balls Cat.II-I
| Part-no. | 658-19-K |
| Weight | n/a |
| Length | 45 |
| Category | II-I |
| Hole | 19,4 |
| Outside diameter | 25 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Reduction bush Cat. II-I
| Part-no. | 658-22 |
| Weight | n/a |
| Length | 44 |
| Category | II-I |
| Hole | 22,5 |
| Outside diameter | 28 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Reduction bush Cat. II-I
| Part-no. | 658-221 |
| Weight | n/a |
| Length | 60 |
| Category | II-I |
| Hole | 22,5 |
| Outside diameter | 28 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Reduction bush for top hook balls Cat.III-II
| Part-no. | 658-25 |
| Weight | n/a |
| Length | 51 |
| Category | III-II |
| Hole | 25,4 |
| Outside diameter | 31,5 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Reduction bush Cat. III-II
| Part-no. | 658-28 |
| Weight | n/a |
| Length | 52 |
| Category | III-II |
| Hole | 29 |
| Outside diameter | 36,5 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Reduction bush Cat. III-II
| Part-no. | 658-281 |
| Weight | n/a |
| Length | 64 |
| Category | III-II |
| Hole | 28 |
| Outside diameter | 36 |
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Unauthorized use of any of the drawings is a violation of copyright and will be prosecuted. The registrated trademark has been placed in our illustrations solely to protect them as part of our intellectual property.