Kverneland

Disc blades for disc harrows - NIAUX
(173)

Compact disc harrows
(292)

Special discs NIAUX
(3)

Disc gang assemblies
(74)

Bearings, flanges and transition pieces
(223)

Hexagon shafts
(3)

Square shafts and accessories
(128)

Disc blade scrapers
(55)

Hop discs NIAUX
(6)

Disc-hubs NIAUX and bearings
(52)

Coulters NIAUX and bearings
(82)

Tension bearings and pedestal bearings
(42)

Tubular packer rollers
(41)

Cage rollers plain bars
(7)

Spiral rollers
(26)

Cage rollers
(56)

Rotary harrow trailers
(102)

Rotary harrow-blades
(22)

Rotary tillers
(21)

Blades for chopper rollers
(10)

Universal mounting brackets for disc gang and rotary harrow assemblies
(1)

Tubular packer rollers segments
(1)

Packer rings
(26)

Tubes rollers and roof ring rollers
(28)

Cambridge roll rings and breaker rings
(31)

Crosskill rings and Toothed roller-rings
(45)

Cam rings
(6)

Accessories for packer rings, cambridge roll rings and crosskill rings
(75)

Meadow starrings
(7)

Weld-on harrow teeth with collar
(2)

Bearings for coulters to fit
(6)

Bearings for coulters NIAUX
(20)

Accessories for bearings
(16)

Discs NIAUX with wavy cutting edge
(7)

Coulters NIAUX
(4)

Coulters for hubs NIAUX with 3 holes
(8)

Coulters NIAUX for hubs with 4 holes
(7)

Coulters NIAUX to fit
(30)

Coulters for hubs with 3 holes
(1)
Bearing without cap piece of the bearing with shaft Ø34mm
Part-no. | 31-L17 |
Weight | 2.090 kg |
Pitch circle diameter | Ø80 |
Attention!! | The bearing is delivered without grease lubrication! |
Important notice: | |
Important notice 1 | The hub 31-L17 is a hub designed plow coulters. As such, it is not designed to absorb lateral forces, and is suited only for straight directions of drive. |
Important notice 2 | The hub 31-L17 contains a needle bearing which is supported, closed and sealed on both sides by the housing and the hub cap. For this reason, a maximum of only one dose of grease may be applied into the hub. Otherwise, damage may occur in the hub. |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Bearing without cap piece of the bearing with shaft Ø30mm
Part-no. | 31-L17A |
Weight | 1.920 kg |
Pitch circle diameter | Ø80 |
Attention!! | The bearing is delivered without grease lubrication! |
Accessories
Part fitting for machine…
No original parts. Manufacturer's designations and original parts numbers are provided for comparison purposes only. The dimensions and weights are approximate and non-binding. Subject to technical changes.
Unauthorized use of any of the drawings is a violation of copyright and will be prosecuted. The registrated trademark has been placed in our illustrations solely to protect them as part of our intellectual property.