Tie - rods M30x3,5

Part-no. 656-141
Weight n/a
Thread M30x3,5 Right thread
Category I
Hole 19,3
Length of the thread 110
Ball end width 62
Ball end height 44
Distance to center bore 175
Part fitting for machine…
Adaptable forOrig.part n°


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

Part-no. 656-142
Weight n/a
Thread M30x3,5 Right thread
Category I
Hole 19,3
Length of the thread 140
Ball end width 62
Ball end height 44
Distance to center bore 185
Part fitting for machine…
Adaptable forOrig.part n°


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

Part-no. 656-143
Weight n/a
Thread M30x3,5 Right thread
Category I
Hole 19,3
Length of the thread 175
Ball end width 62
Ball end height 44
Distance to center bore 230
Part fitting for machine…
Adaptable forOrig.part n°


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

Part-no. 656-146
Weight n/a
Thread M30x3,5 Right thread
Category II
Hole 25,7
Length of the thread 120
Ball end width 75
Ball end height 51
Distance to center bore 175
Part fitting for machine…
Adaptable forOrig.part n°


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

Part-no. 656-147
Weight n/a
Thread M30x3,5 Right thread
Category II
Hole 25,7
Length of the thread 140
Ball end width 75
Ball end height 51
Distance to center bore 195
Part fitting for machine…
Adaptable forOrig.part n°


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

Part-no. 656-148
Weight n/a
Thread M30x3,5 Right thread
Category II
Hole 25,7
Length of the thread 165
Ball end width 75
Ball end height 51
Distance to center bore 220
Part fitting for machine…
Adaptable forOrig.part n°


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

Part-no. 656-149
Weight n/a
Thread M30x3,5 Right thread
Category II
Hole 25,7
Length of the thread 110
Ball end width 75
Ball end height 51
Distance to center bore 170
Part fitting for machine…
Adaptable forOrig.part n°


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

Part-no. 656-170
Weight n/a
Thread M30x3,5 Right thread
Category I
Hole 20,1
Length of the thread 165
Ball end width 65
Ball end height 44
Distance to center bore 230
Part fitting for machine…
Adaptable forOrig.part n°


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

Part-no. 656-172
Weight n/a
Thread M30x3,5 Right thread
Category II
Hole 25,7
Length of the thread 140
Ball end width 62
Ball end height 44
Distance to center bore 195
Part fitting for machine…
Adaptable forOrig.part n°


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

Part-no. 656-173
Weight n/a
Thread M30x3,5 Right thread
Category I
Hole 19,3
Length of the thread 90
Ball end width 62
Ball end height 44
Distance to center bore 140
Part fitting for machine…
Adaptable forOrig.part n°


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

Part-no. 656-241
Weight n/a
Thread M30x3,5 Left thread
Category I
I 65
Hole 19,3
Length of the thread 110
Ball end width 62
Ball end height 44
Distance to center bore 175
Part fitting for machine…
Adaptable forOrig.part n°


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

Part-no. 656-242
Weight n/a
Thread M30x3,5 Left thread
Category I
Hole 19,3
Length of the thread 140
Ball end width 62
Ball end height 44
Distance to center bore 185
Part fitting for machine…
Adaptable forOrig.part n°


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

Part-no. 656-243
Weight n/a
Thread M30x3,5 Left thread
Category I
Hole 19,3
Length of the thread 175
Ball end width 62
Ball end height 44
Distance to center bore 230
Part fitting for machine…
Adaptable forOrig.part n°


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

Part-no. 656-246
Weight n/a
Thread M30x3,5 Left thread
Category II
Hole 25,7
Length of the thread 120
Ball end width 75
Ball end height 51
Distance to center bore 175
Part fitting for machine…
Adaptable forOrig.part n°


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

Part-no. 656-247
Weight n/a
Thread M30x3,5 Left thread
Category II
Hole 25,7
Length of the thread 140
Ball end width 75
Ball end height 51
Distance to center bore 195
Part fitting for machine…
Adaptable forOrig.part n°


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

Part-no. 656-248
Weight n/a
Thread M30x3,5 Left thread
Category II
Hole 25,7
Length of the thread 165
Ball end width 75
Ball end height 51
Distance to center bore 220
Part fitting for machine…
Adaptable forOrig.part n°


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

Part-no. 656-249
Weight n/a
Thread M30x3,5 Left thread
Category II
Hole 25,7
Length of the thread 110
Ball end width 75
Ball end height 51
Distance to center bore 170
Part fitting for machine…
Adaptable forOrig.part n°


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

Part-no. 656-270
Weight n/a
Thread Left thread
Category I
Hole 20,1
Length of the thread 165
Ball end width 65
Ball end height 44
Distance to center bore 230
Part fitting for machine…
Adaptable forOrig.part n°


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

Part-no. 656-272
Weight n/a
Thread M30x3,5 Left thread
Category II
Hole 25,7
Length of the thread 140
Ball end width 62
Ball end height 44
Distance to center bore 195
Part fitting for machine…
Adaptable forOrig.part n°


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

Part-no. 656-273
Weight n/a
Thread M30x3,5 Left thread
Category I
Hole 19,3
Length of the thread 90
Ball end width 62
Ball end height 44
Distance to center bore 140
Part fitting for machine…
Adaptable forOrig.part n°


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

Part-no. 656-340
Weight n/a
Thread M30x3,5 Right thread
Category II
Hole 25,7
Length of the thread 85
Ball end width 75
Ball end height 51
Distance to center bore 140
Part fitting for machine…
Adaptable forOrig.part n°


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

Part-no. 656-341
Weight n/a
Thread M30x3,5 Right thread
Category II
Hole 25,7
Length of the thread 75
Ball end width 75
Ball end height 51
Distance to center bore 125
Part fitting for machine…
Adaptable forOrig.part n°


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

Part-no. 656-440
Weight n/a
Thread M30x3,5 Left thread
Category II
Hole 25.7
Length of the thread 85
Ball end width 75
Ball end height 51
Distance to center bore 140
Part fitting for machine…
Adaptable forOrig.part n°


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

Part-no. 656-441
Weight n/a
Thread M30x3,5 Left thread
Category II
Hole 25.7
Length of the thread 75
Ball end width 75
Ball end height 51
Distance to center bore 125
Part fitting for machine…
Adaptable forOrig.part n°


IHOF spare parts are non-genuine parts. All references to original brand descriptions and part numbers are made only for the sake of comparison.
The unauthorized use of the drawings depicted,
constitutes an infringement of copyright and will be prosecuted by us.
Technical dimensions are subject to change without prior notice.
Weights and measurements are approximate and unbinding.

The trade mark has been placed in our illustrations with the sole aim of protecting our illustrations as part of our intellectual property.