Parts to fit Regent
The original part number is indicated only for the sake of comparison!
4. Extirpator shares, Cultivators shanks, Weeding and hoeing technology
| Part-no | Description | Orig.part n° | |||
|---|---|---|---|---|---|
| » Weeding and hoeing technology » Jointer » Jointer to fit | |||||
| 1.10.1119 | Jointer 180mm | 33.54.192 * | |||
| 1.10.1119.D | Jointer 180mm - DURAFACE | 33.54.192 * | |||
| 1.10.1120 | Jointer 120mm - half-sided cranked left | 811.02.75 2 * | |||
| 1.10.1121 | Jointer 120mm - half-sided cranked right | 811.02.75 1 * | |||
| » Big harrow tines,, shares and clamps » Big harrow tines to fit as | |||||
| 101.310721 | Big harrow tine | 33.42.248 * | |||
| » Weeding and hoeing technology » Weeder tine » Weeder tine to fit | |||||
| 10.HS-RE1 | Following tine Ø6,5mm | 33.45.164 * | |||
| 10.HS-RE2 | Following tine Ø8mm | 33.45.196 * | |||
| » Clamps for harrow spring-tines » Clamps for harrow spring-tines to fit | |||||
| 1.HH17-3009 | Clamp for tine 32x12 with reinforcing spring 32x10 | 33.42.185 * | |||
| 1.HH17-3101 | Clamp for tine 32x10 | 33.36.164 * | |||
| 1.HH17-3103 | Clamp for tine 32x10 - 32x12 - BBG | 33.42.185 * | |||
| 1.HH17-3103.P | Clamp for tine 32x10 - 32x12 - Powder coated | 33.42.185 * | |||
| 1.HH17-3202 | Clamp for tine 70x12 | 33.37.282 * | |||
5. Following tines, Seed drilling technology BOURGAULT, Seed drill discs
| Part-no | Description | Orig.part n° | |||
|---|---|---|---|---|---|
| » Following tine | |||||
| 10.HS-R7 | Following tine Ø7mm | 33.45.164 * | |||
| 10.HS-RE1 | Following tine Ø6,5mm | 33.45.164 * | |||
| 10.HS-RE2 | Following tine Ø8mm | 33.45.196 * | |||
| 10.ST-K-4 | Following tine Ø12mm | 33.76.172 * | |||
| 10.ST-SI | Following tine Ø12mm | 33.76.172 * | |||
* The original part number is indicated only for the sake of comparison!